Download Print this page

pagertec Alpha TXT User Manual

Wireless call button paging system

Advertisement

Quick Links

Wireless Call Button
Paging System

Advertisement

loading

Summary of Contents for pagertec Alpha TXT

  • Page 1 Wireless Call Button Paging System...
  • Page 2 Thank you for choosing Pagertec Thank you for choosing Pagertec as your provider for your wireless paging requirements. is providing you with total customer satisfaction. Please take a few minutes to review this manual prior to installing and operating your system. The manual will provide you with installation instructions, and offer suggestions to ensure you receive all of the many Pagertec has the most responsive customer service available within the industry.
  • Page 3: Paging System

    Wireless Call Button PAGING SYSTEM...
  • Page 4: Installing The Transmitter

    We recommend some type of surge protector on the power supply for protection. Power surges are not covered under system warranty. (2) Alpha TXT Pagers Locate the charger base for the pagers, place it in a sturdy out of way area. Connect the charger base to the power with the provided power supply.
  • Page 5 Attach the pager on the employees belt using its belt clip. Be sure that there is message on the pager. Normally it will say “Pagertec” or it will say the name of your business. if it does not display anything the pager might be off and may need more charging time.
  • Page 6 EX: 5 - Manager Needed ( This means that from call button number #5 they pressed the 4) The Alpha TXT pager can save and store the last 5 messages it received. To view the messages press and hold the button on the side of the pager for 3 seconds. To continue to scroll press the button again for 1 second.
  • Page 7 5) If the message is stored you can usually clear the message out of the pager by going to the call button it received the page from and pressing “Cancel”. This helps the user keep track of the tasks may or may not need attention. 6) To clear all the messages from the pager the master erase is activated by placing the pager on the charging station for 5 seconds.
  • Page 8 Pagertec pagers are made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or ISOPROPYL ALCOHOL-BASED CLEANERS. We have done extensive testing with available cleaning materials and have not found any issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA).
  • Page 9: Fcc Compliance And Advisory Statement

    FCC COMPLIANCE AND ADVISORY STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.