Fcc Compliance And Advisory Statement - pagertec Matrix Plus User Manual

FCC COMPLIANCE AND ADVISORY STATEMENT

​
T his device complies with Part 15 of the FCC rules. Operation is subject to the
following ​ t wo conditions: (1)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, according to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try correct the interference by one or more of the following
measures:
​
1. R eorient the receiving antenna.
​
2. I ncrease the separation between the equipment and receiver.
3. C onnect the equipment into and outlet on a circuit different from that to which the ​
receiver is connected.
​
4. C onsult the dealer or an experienced radio/TV technician for help. Any special
accessories needed for compliance must be specified in the instruction manual.
​
WARNING: A shielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It is essential
that only the supplied power cord be used. Use only shielded cables to connect I/O
devices to this equipment.
​
CAUSION: A ny changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
t his device may not cause harmful interference, and ​ ( 2) ​