Table of Contents
Advertisement
OUT OF RANGE (FACTORY DEFAULT: OFF)
With this feature, the coasters will beep when taken out of range of the transmitter to
inform the guest that they are too far away and will miss their page. The beeping will
automatically stop when they step back within range.
Be sure you have all your coasters before performing this procedure.
TURNING THE OUT OF RANGE ON
•
R emove all the coasters from the charging unit or unplug the power supply that
is connected to the first charging base.
•
A t the
" Out of Range"
•
P ress the
" ENTER"
tell you that they received the new code.
•
P ress
" CANCEL"
R ANGE TEST (FACTORY DEFAULT: OFF)
With this feature you can determine what distance your transmitter will cover.
•
R emove a couple of coasters from the charging stack.
•
A t the range test menu, press "#/Select" key to turn range test "ON" and to start the
range test. As soon as the range test is activated you'll notice the coasters flash once
every 30 seconds. Walk around your property. When you reach the point where the
coasters do not flash consistently, this is your maximum range. If you would like to
increase your power level, exit range test and call Pagertec.
•
P ress the
" CANCEL"
exit the system programming menu. N OTE:
that will stop the range test after 15 minutes.
m enu, press the
k ey. After sending the signal, all the coasters will light up once to
k ey to exit the system programming menu.
k ey to stop the range test. Press the
" #/Select"
k ey to turn the out of range ON.
" CANCEL"
T he transmitter has an auto shut off feature
k ey again to
7
Advertisement
Table of Contents
