Booster Pump Retrofit Diagrams; Installation Steps And Start-Up Procedures - Hague WaterMax H3500 Owner's Manual And Installation Manual

Booster Pump Retrofit Diagrams

WaterMax H6000
®
For retrofit instructions see form #F0874

Installation Steps and Start-Up Procedures

We recommend that you have your local Hague dealer install and service this appliance.
Warning: Installation of this appliance must conform with state and local plumbing and electrical
codes, laws, regulations, and the instructions provided with this appliance. Failure to install as
instructed will void the product warranty.
Study the Installation Diagram
Step 1
Study the overall installation diagram before proceeding, to familiarize yourself with the general
layout of the appliance (See Figure 2).
Check Fit
Step 2
Ensure that the complete appliance will fit under the sink. Check all factory fittings
connections. Be sure all locking clips are in place. See steps A through F and the illustrations
below for tube connection instructions.
The WaterMax
1
all factory fittings upon installation.
WaterMax RO Owner's Manual
Figure 4: WaterMax
RO has been pressure tested. However, due to shipping vibrations, Hague recommends rechecking
®
H6000
®
9/2020
and tubing
1
17