Installation Tool List - Hague WaterMax H3500 Owner's Manual And Installation Manual

Installation Tool List

The following are the tools you may need for installation.
Recommended Tool List
1/4-inch High-speed drill bit
7/16-inch High-speed drill bit
1/2-inch High-speed drill bit, with 3/8-inch shank
(for non air gap spigot)
1-inch High-speed drill bit with 1/2-inch shank
(for air gap spigot)
1/2-inch Drill motor (for 1-inch high-speed drill bit)
1/2-inch Open-end wrench
9/16-inch Open-end wrench
5/8-inch Open-end wrench
Medium-sized Phillips screwdriver
WaterMax RO Owner's Manual
Optional Tool List
Needle nose pliers
7/8-inch High-speed hole saw
Air-pressure test gauge, 1-20 psi
7/8-inch chassis punch
Conductivity or TDS meter
Water-pressure test gauge
Bicycle tire pump
Silicon/carbide grinding wheel
High-speed Dremel tool
9/2020 14