Frigidaire FRT21TSGW2 User Manual page 11

Reversible Door
Instructions
(continued)
11. Place original washer
over hole in refrigerator door and line up
hole in center hinge. Insert hinge pin
through both holes. Place washer (some
models) on hinge pin, then position
freezer door on center hinge.
Washer
Bolts
9. Using a putty knife, remove the black
plastic plug (not shown) from front of
base and reinstall in the opposite set of
lower hinge holes. Assemble lower hinge
to cabinet. Install hinge pin in opposite
hinge hole from which it was removed.
Install the washer (some models) on the
lower hinge pin and insert hinge bolts, but
do not tighten. Hinges will have to remain
loose against cabinet to align door.
12. Remove plug from upper bearing of
(some models)
door and reinstall on opposite side.
Hinge Pin
Lower Hinge
Bearing Plug
1 1
10. Turn center hinge upside down and
secure to cabinet as shown, using the
screws which are in the new holes. Install
refrigerator door on lower hinge pin.
Align door with edge of cabinet. Hold the
door on front of cabinet.
13.
Assemble upper hinge to top of cabinet
and door. Use opposite set of holes. Do not
completely tighten screws.
Align doors so there is a parallel gap between
doors. Adjust doors to cabinet so gaskets
seal but do not bind. Tighten upper and
lower hinge screws.
Additional adjustment may be necessary
after loading the door shelves. Return food,
bottles, and other articles to doors. Turn the
refrigerator control on and to the
previous setting.