Related Manuals for Branick 350M
Summary of Contents for Branick 350M
- Page 1 Installation, Operation MODEL 350M & Repair Parts NITROGEN INFLATION Information SYSTEM Branick Industries, Inc. • 4245 Main Avenue • Fargo, North Dakota 58103 P/N: 81-0227 REV010115...
- Page 2 TABLE OF CONTENTS _______________________________________________________ SAFETY INSTRUCTIONS DEFINITIONS SPECIFICATIONS INTENDED USE INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS MAINTENANCE REPAIR PARTS 5, 6 SAFETY INSTRUCTIONS _____________________________________________________ ▪ NEVER allow unauthorized personnel to operate this product. ▪ NEVER use this product for anything other than its intended use. ▪...
- Page 3 CAUTION Before using this product, read and fully understand the operating instructions and all decals on the product. This is necessary to prevent injury to the operator and damage to the product. Do not attempt to use this product for anything other than its intended purpose.
- Page 4 INSTALLATION INSTRUCTIONS _______________________________________________ 1. Unpack and remove unit from shipping carton and pallet. 2. Inspect the unit for any visible damage. 3. Make sure the installation location is free from explosion or fire hazard and is a suitably ventilated; otherwise, ventilate the area periodically during use of the equipment. 4.
- Page 5 MAINTENANCE _____________________________________________________________ NOTE: To avoid personal injury or damage to the Nitrogen Inflation System, permit only qualified personnel to perform maintenance. When cleaning or replacing filter elements and automatic float drains, shut off the supply air by turning the valve lever on the front of the unit to “OFF”. After the Inlet Pressure Gauge reads zero, you can service the filters.
- Page 6 REPAIR PARTS _____________________________________________________________...
- Page 7 ITEM PART NO. DESCRIPTION 06-0034 MODEL 350 CABINET 06-0035 COVER PANEL 50-0125 1/4-20 X 5/8 BTN HC SCREW 50-0126 5/16-18 X 5/8 BTN HC SCREW 51-0039 RIVET 1/4-20 NUT 53-0030 4-1/2 O.D. CLAMP 53-0033 2-1/4 O.D. CLAMP 055-105 5/16-18 SF HEX LOCK NUT 59-0042 NYLON RATCHET PLUG 60-0107...
- Page 8 Replacement is the exclusive remedy for defective product under this warranty. This warranty is expressly in lieu of all other warranties, including any implied warranty of merchantability or any implied warranty of fitness for a particular purpose of this product. Branick industries, inc. Shall not be liable for any consequential or incidental damages.
Need help?
Do you have a question about the 350M and is the answer not in the manual?
Questions and answers