Maintenance Schedule - Gravely ZT XL Owner's/Operator's Manual

Hide thumbs Also See for ZT XL:
Table of Contents

Advertisement

WARNING: AVOID INJURY. Read and understand
the entire Safety section before proceeding.
IMPORTANT: Proper maintenance can prolong the life of
unit. The following chart shows the recommended service
schedule. Refer to the maintenance instructions in the
Engine Manual for additional information.
Interval
Check Safety Interlock
System
Check Parking Brake
Each Use
Clean Unit
Check Tires
Check Mower Blades
Follow Engine Manual

Maintenance Schedule

Each Use
Check Battery
Lubricate Unit
25 Hours or
Every Season
50 Hours or
Check Fasteners
Every Season
Check All Belts
100 Hours or
Every Season
MAINTENANCE SCHEDULE
Task
WARNING: Safety interlock system failure and improper operation of unit
can result in death or serious injury. Test this system each time the unit is
operated. If this system does not function as described, do not operate until
repairs are made (see Safety Interlock System on page 10).
Engage parking brake and engage transmission bypass lever (see on page 14).
Push unit. If unit rolls, contact your Gravely Dealer.
Clean engine, battery, seat, mower deck, etc. of all dirt and debris. Do not use
solvents, hard cleaners, or abrasives.
NOTE: Protect painted surfaces with automotive type wax.
See SPECIFICATIONS on page 25 for correct tire pressure.
Check for worn or damaged mower blades (see SHARPENING MOWER BLADE on
page 17).
Perform scheduled engine
maintenance. Refer to Engine
Manual for detailed instructions.
NOTE: To drain the oil, use the oil
drain petcock (1) supplied with unit,
not the drain plug that is shown in the
Engine Manual.
Keep battery and battery terminals clean (see Cleaning Battery and Battery Cables
on page 19).
Apply grease to zerk (1) on each front wheel
Check mower blade mounting hardware and all other fasteners. Replace fasteners
that are missing or damaged. Tighten all nuts and bolts to the correct torque value.
Replace worn or deteriorated belts.
• Check hydrostatic belt (see REPLACING HYDROSTATIC BELT on page 21 for
hydrostatic belt location).
• Check PTO belt (see REPLACING PTO BELT on page 20 for PTO belt
location).
NOTE: To have full access to the engine, the seat must be
tipped forward (see TIPPING SEAT FORWARD on page 15)
and the hood opened (see on page 15).
Action
GB - 14
1
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents