Snmp Management - RuggedCom WiN52 Series User Manual & Installation Manual

6.4

SNMP Management

There are two MIB types available in the CPE:
the standard MIB II (RFC 1213)
•
the private MIB
•
Table 6 -4 describes the CPE Managed Parameters .
Table 6-4: Subscriber Station Parameters
Parameter
Location site
+ Contact details
Cell ID
Data Interface
Status
Temperature
Software Version
Uptime
Number of
registered SU
SU MAC
Addresses
SU Type
Radio Status
TX Counter
RX Counter
WiN5200
Description
Activity
(Connected/Disconnected),
Speed (10/100/1000), Duplex
(Full/Half), IP Address,
temperature inside the case
all Modules software's versions
on time from power up
Transmit: On/Off
Frequency: configured radio
frequency
Configured BW/FFT
Transmit power
Number of transmit packets
Number of receive packets
MIB Type Remarks
MIB II
Private
MIB II
Private
Private
Private
Private
Private
Private
Private
Private
Private
Management | 51