Adjustment Using A Test Pattern - Canon 2502C016 User Manual

Adjusting the Image

Adjustment Using a Test Pattern

Resolution and colors can be adjusted during installation by using test patterns.
To access the test pattern menu, select [Test pattern] > [On] (P160) in the [Install
settings] menu or press the TEST PATTERN button on the remote control.
While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Also, if there is an option pattern available, you can use the [ ] / [ ]
buttons to switch pattern. A dialog box is shown during test pattern display that
identifies the current test pattern and provides operating instructions.
Watch the test pattern projected as you adjust the image.
The following test patterns can be displayed.
Use [ ] / [ ] to
switch patterns
(1)
Color bars
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9) Character
(10) Focus
(11) Border
(12)
(13) DICOM
Use [ ] / [ ] to switch
option patterns
Stairstep H
Stairstep V
Color steps
Checker
Multi
Cross Hatch
107
Raster 100%
(White / red / green / blue)
Raster 50%
(White / red / green / blue)