Canon 2502C016 User Manual page 162

Menu Description
User screen settings
> [System settings] >
Capture a logo and specify logo display settings.
Logo capture
Registers the current image as a user logo. Registered user logos can be shown when no
signal is received, when the BLANK button is pressed, or as the startup image.
Option
Display the image for logo registration.
Align the image with the red boundary lines indicating the portion that
OK
will be stored, and then press the OK button. The portion of the image
within the boundary lines is now registered.
Cancel Cancels logo registration.
Only images at an aspect ratio of 16:10 can be registered as user logos.
Logo position
Specify the position of registered user logos.
You can specify the position after a logo has been registered. Choose from upper left, upper
right, center, lower left, or lower right.
No signal screen
Customize the screen shown when no input signals are received.
Option
Black The screen is all black.
Blue The screen is all blue.
User logo The user logo is projected.
Screen when blank
Select the screen shown when projection is temporarily blanked out by pressing the BLANK
button on the remote control.
Option
Black The screen is all black.
Blue The screen is all blue.
Light source off The light source is turned off.
User logo The user logo is projected.
[User screen settings]
162
Function
Function
Function