Unpacking The Framegrabber; Installing The Framegrabber In The Monitor Trolley - Siemens SIREMOBIL Compact CODONICS EP 1660 System Manual

2 - 2
1
Fig. 2

Unpacking the framegrabber

•
Open the packaging of the framegrabber from the top.
•
Remove the framegrabber and the hand-held control unit.
•
Remove the plastic bag.

Installing the framegrabber in the monitor trolley

•
Remove the large rear cover from the monitor trolley.
•
Remove the framegrabber from the packaging.
•
Remove the front and rear screws on both sides of the framegrabber cover (1/Fig. 2).
•
Insert the framegrabber from the front in the fixing bracket and secure laterally to the
fixing bracket with the lock washers and knurled screws supplied(1/Fig. 3).
•
The fan and the connections of the framegrabber point to the rear.
SIREMOBIL Compact
System Manual
1
Fig. 3
SPR2-130.814.01
Rev. 01 03.01
Installation
1
Page 2 of 14
TD PS 24
1
2
2
Siemens AG
Medical Solutions