Power Switch; Replacing The Rear Cover Of The Monitor Trolley - Siemens SIREMOBIL Compact CODONICS EP 1660 System Manual

Installation

Power switch

•
Switch on power to the printer (11/Fig. 15).
•
Switch on power to the framegrabber (12/Fig. 15).
•
Load the film cassette with film screens and insert to the printer.

Replacing the rear cover of the monitor trolley

•
Unscrew the protective conductor of the existing rear cover of the monitor trolley.
•
Unpack the new rear cover.
•
Screw the protective conductor onto the new rear cover.
•
If the new rear cover does not contain cable holders, unscrew the cable holders of the old
rear cover and mount on new rear cover.
Siemens AG
Medical Solutions
SPR2-130.814.01
Rev.01_V 03.01
Page 13 of 14 SIREMOBIL Compact
TD PS 24
2 - 13
2
2
System Manual