You can add sound from audio devices (AUDIO IN) or with the built-in microphone
(MIC. IN).
This function is operated with the wireless controller.
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
OUTPUT
AUDIO
L
R
Dubbing
CAMERA
AUDIO SETUP
(
39)
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it
to [AUDIO IN] or [MIC. IN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE a button on the wireless controller.
5. Press the AUDIO DUB. button on the wireless
controller.
"AUDIO DUB." and "
6. Press the PAUSE a button on the wireless controller
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the built-in microphone.
88
Audio Dubbing
Signal flow
STV-250N Stereo Video Cable
(supplied)
PLAY (VCR)
a" appear.
CARD CAMERA
AUDIO DUB.•••AUDIO IN
AV
CARD PLAY
ZERO SET
REW
PLAY
FF
MEMORY
12bit
STOP
AUDIO OUT
PAUSE
SLOW
2
AUDIO DUB.
AV INSERT AV DV REMOTE SET
ZERO SET
REW
PLAY
FF
MEMORY
12bit
STOP
AUDIO OUT
AUDIO DUB.
PAUSE
SLOW
2
AV INSERT AV DV REMOTE SET