Footswitches And Leds - GFI System ROSSIE User Manual

2. Footswitches and LEDs

ENGAGE / RAMP SWITCH
TAP
-> bypass / engage
HOLD (when bypassed) for > 500 ms
-> engages momentarily
HOLD (when engaged) for > 500 ms
-> start parameter ramping.
Momentary Operation
< when bypassed >
mentary operation, i.e pedal will revert to bypassed state when footswitch is released.
Ramping
< when engaged >
mapped parameters is ramped from its initial value to pre-configured final value, and stays at
that final value for as long as the footswitch is held down. When switch is released the parame-
ter gradually returns to its initial value.
A/B - TAP switch Priority.
Priority for the A/B-TAP footswitch can be reversed in Global setting (see page 6 for details).
ON/OFF LED
~ Holding the Engage/Ramp button down for at least 1/2 sec triggers mo-
~ Holding the button for at least 1/2 sec triggers ramping operation : a
TEMPO LED
A/B - TAP SWITCH
TAP
HOLD for 1 second
tempo LED stops blinking you may tap
in the new tempo*.
* Tap-tempo is applicable only in
Step Filter mode.
PRESET LED
Orange: Preset A,
2
User Manual
R O S S I E
-> change preset (A <-> B)
-> enter tap-tempo mode: when
Green : Preset B
FILTER