Connecting To Your Wireless Network - NetCommWireless NF17ACV Wireless Setup Manual

Connecting to your wireless network

Use a computer/laptop, mobile or other wireless device to scan for wireles networks, select the right Wi-Fi
network name/SSID (e.g. NetComm 8386) enter the displayed Wi-Fi password to join the network.
Windows 10
The following is an example of connecting to the WiFi network using Windows 10.
1 Click the wireless symbol in the bottom right corner of the device. A list of detected networks within range of your
computer is displayed. Select your WiFi network name (In this example, it is "NetComm 8386") and click Connect.
2 Enter the WiFi security key/password and click Next.
3 Your computer connects to the WiFi network.
If you are facing difficulty to connect the Wi-Fi network name, refer to "Wireless Troubleshooting Guide" from
FAQs section.
NF17ACV FAQs 5 of 7
© NetComm Wireless 2017