Download Print this page

Keystone KSTAT12-1B User Manual page 9

Window/wall type room air conditioner

Advertisement

INSTALLATION INSTRUCTIONS
IMPORTANT
This units increased performance characteristics result from having two rear air intakes.
It is very important that these installation instructions are followed so y our unit can operate at
maximum efficiency.
If this is an existing sleeve, and there is an existing rear grille, it needs to be replaced by one that
has been shipped with the unit in the accessory kit.
FOR INCREASED EFFICIENCY,UTILIZE THE PROVIDED LOUVERED REAR PANEL
Installation of new grille provided with unit
1. Remov e the existing grille.
2. Place the grille included with the new air conditioner towards the rear of the sleev e.
3. Mark through the hole pos itions .
4. Drill through the sleeves flanges with a 1/8 drill bit.
5. Attached the new grille with self-threading s crews and washers .
6. It is VERY IM PORTANT that the grill e is plac ed ex actly as shown below.
7.Most decorative exterior grilles m ay be left in place as long as the proper interior air direction grille
is installed.
6

Advertisement

loading

This manual is also suitable for:

Kstat12-2b