nedis 5412810327393 Quick Start Manual page 6

•
Do not short circuit.
•
Do not repair the product. If damaged, it must be properly
disposed of.
Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4 Press and hold both earphone buttons A
seconds to switch the earphones on manually.
2. The status indicator LED A
indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT3052WT" from the list of available Bluetooth
devices on your device.
Charging the product
1. Plug the Micro USB cable A
of the charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4 The charging indicator LED A
charging.
4
4
A
switches off when the earphones are fully charged.
4. Place the earphones into the respective slots A
close the lid A
5. The status indicator LED A
red.
5
6. A
switches off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
seconds.
• To end a call, press A
Controlling the music
6
• Press A
9
1
to charge the earphones.
6
or A
8
or A
to play or pause the music.
5
blinks red and blue to
9
into the Micro USB port A
into a computer or power
4
lights up red when
5
on the earphones lights up
6
or A
8
.
6
6 8
A
for 2
3 7
A
8
.
6 8
or A
2
and
for 2