Important Safeguards; Main Specification - Champion HBT100 User Manual

IMPORTANT SAFEGUARDS

1. When using your headset while driving, follow local regulations in the region you are in.
2. Never disassemble or modify your headset for any reason. Doing this may cause the
headset to malfunction or become combustible. Bring the headset to an authorized service
E N
center to repair it.
3. Keep your device and all accessories out of the reach of small children or animals. Small
parts may cause choking or serious injury if swallowed.
4. Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above
45 °C). Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.
5. Do not allow your device to get wet — liquids can cause serious damage. Do not handle
your device with wet hands.
6. Avoid using your device's light close to the eyes of children or animals.
7. Do not use the device during a thunderstorm. Thunderstorms can cause the device to
malfunction and increase the risk of electric shock.
8. Always store the headset with the power off and safely protected.

Main Specification

1. Noise cancellation:
2. Charging time:
3. Sensitivity:
4. Bluetooth version:
5. Bluetooth support agreement:
6. Frequency range:
7. Bluetooth range:
8. Battery:
9. Working time:
10. Standby time:
11. Impedance:
12. Built in:
Functions
Charging:
• When using for the first time, charge the battery until it is full.
• To charge, plug the charging cable into the Bluetooth earphone charging port. Red light
means it is charging, blue light means the battery has been fully charged.
Turn on and Paring:
• Place the headset and the pairing device within 1 meters from each other.
• Press and hold the Multifunction button for 5 seconds until the red and blue light flashes
alternately, signaling that it is in pairing mode.
• Activate your pairing device's Bluetooth feature. Search for "HBT100", and select it to
connect.
• If a password is requested, key in "0000".
Automatic reconnection:
• Once the Bluetooth earphone and the pairing device has been paired together, they will
automatically be reconnected if they are within distance of each other and the pairing
device's Bluetooth function is turned on.
AEC/NR
40mins
108dB±3dB
4.2
A2DP/AVRCP/HSP/HFP/SPP/HID
20HZ-20Khz
10m
3.7V 55mAH
4-6hours at 50% Volume
70 hours
32Ω
Microphone