Table of Contents
Advertisement
Wear gloves when replacing light
bulbs to avoid getting cut.
REPLACING LIGHT BULBS
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken
glass.
3.
Remove light cover, if necessary.
4. Unscrew and replace old bulb with an appliance bulb
of the same type and wattage.
5. Replace light cover, if necessary.
6. Remember to plug the refrigerator back in.
Crisper Light Replacement (Models may vary)
Short
Vacations
Long
Vacations
Moving
IMPORTANT: If the refrigerator is going to be stored or moved in freezing temperatures, the water in
the ice and water system must be drained completely. Failure to do so could result in water leaks when
the refrigerator is put back into service. Contact a service representative to perform this operation.
Care & Cleaning
Light Socket
Located Behind
Left Rear
of Crispers
or
Vacation and Moving Tips
•
Leave refrigerator operating during vacations of 3 weeks or less.
•
Use all perishable items from refrigerator compartment.
•
Turn automatic ice maker off and empty ice bucket, even if you will only be
gone for a few days.
•
Remove all food and ice if you will be gone one month or more.
•
Turn off automatic ice maker and turn water supply valve to closed position.
•
The On/Off button on the Electronic Control only controls your refrigerator's
cooling system. To turn off power to your refrigerator you must unplug the
power cord from the wall outlet.
•
Clean interior thoroughly.
•
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
•
Remove all food and ice.
•
If using handcart, load from side.
•
Adjust rollers all the way up to protect them during sliding or moving.
•
Pad cabinet to avoid scratching surface.
(continued)
Refrigerator Light
Located behind
control panel
Refrigerator Light Replacement
Crisper Light
Cover
Light Bulb
23
Freezer Light Replacement
Advertisement
Table of Contents
