Table of Contents
Advertisement
ALLOWING COOLING TIME BEFORE USE
To ensure reliable food storage, allow your refrigerator and freezer to operate with the doors closed for 8 to
12 hours before placing food inside. During this cooling period, you do not need to adjust the controls, which
are preset at the factory.
SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel
is located at the top of the the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your
freezer and fresh food compartments.
do not display the current accurate compartment temperature. Should you desire to see what the current
accurate temperature is, place a separate thermometer inside the freezer or fresh food compartment in the
desired location.
(Single Digit Display - Features may vary.)
NO
NO
TE
TE
NOTE
NO
NO
TE
TE
The advanced electronic control system in your refrigerator includes additional display modes that service
professionals can use to rapidly diagnose performance issues.
Controls & Settings
The models with a 2-digit temperature display are for reference only, and
(Temperature Display - Features may vary.)
To adjust the temperature to a higher or lower setting, press
the Up (Cold) or Down (Colder) button closest to the
display. The first time you press the button, the display
shows current setting you entered. Each press of the button
after that changes the setting by one.
The display shows your new setting momentarily, then
changes back to the current temperature.
8
Advertisement
Table of Contents
