Untangle e6wl Setup Manual

Package Contents
The e6wl package includes:
Power adapter and cable
●
VESA mounting bracket and screws
●
Rubber feet
●
2x WiFi antennae
●
2x LTE antennae
●
e6wl appliance
●
Installation
1. For VESA mount installations, attach the mounting bracket to the bottom of the appliance using the provided screws.
2. For desktop installation, attach the rubber feet to the bottom corners of the appliance.
3. Fasten the included WiFi antennae to the WiFi labeled SMA connectors.
4. Fasten the included LTE antennae to the LTE labeled SMA connectors.
5. Connect an ethernet or Fiber cable from your Internet modem or router to either of the WAN ports.
6. Connect an ethernet cable from your management computer to any of the LAN ports.
7. Plug in the power adapter to a power source and connect it to the power input on the rear panel.
8. Power on the system by pressing the power button located on the rear panel next to the power input.
Getting Started
You can manage your Untangle SD-WAN Router via ​ C ommand Center​ or from the local network.
From Command Center
1. Navigate your web browser to ​ h ttps://untangle.com/cmd​ .
2. Log in with your Untangle Command Center account, or click ​ C reate Account​ to set up an account.
3. Navigate to the Appliances screen and click ​ A dd​ .
4. Enter the Untangle serial number located on the bottom of your appliance.
untangle.com​ ​ | © Copyright 2019. Untangle, Inc. All rights reserved.
Rear Panel
Front Panel
e6wl Setup Guide
e6wl Setup Guide - Page 1