X-Tronic DFX-300 Instructions Manual page 8

away and not swirled around the work area, while increasing the
life of the fan motors.
This device comes with two lighting options. 1) Work Lights - bright
LEDs that ensure the work area is brightly lit for a clear crisp view of the
device and 2) Dust Detection Lights - Green LEDs that allow for easy
dust detection while working to ensure no dust gets inside of the device
being repaired. Both lights are adjustable for user preference and work
situation.
5. The dual lighting system is activated with the switches on the right
side of the unit. Each light can be operated independently. The
light intensity can be adjusted using the Light Adjustment knobs.
6. Power the fans on to a medium setting and let them run for 5 -10
minutes to ensure that there is no dust or other particles left in the
work area.
- 6 -