Shelves - Frigidaire FRS26WGHW0 User Manual

Shelves

Cantilever Shelf
Wine Rack
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting
shelves, remove all food. Remove and discard shipping clips wedged into the
cantilever rail above the shelf hook (see below). These clips stabilize the shelves
during shipping.
To adjust the cantilever shelves (supported at the rear of the refrigerator), lift
the back of the shelf up and out. Replace shelf by inserting rear hooks into slots.
Lower and lock into position.
Remove Shipping Clips
Wine Rack
(some models)
The wine rack stores bottles of wine, or single 2-liter plastic bottles of juice or
soda pop. To install, slide wine rack onto the shelf with the curve facing in. To
remove, slide wine rack out. Install on either side of a Spillsafe™ shelf.
Slider-Flip Shelf
(some models)
Your Spillsafe™ slider-flip shelf provides more space and organization
options. The slider-flip shelf is adjustable, like your other shelves. Clean your
slider-flip shelf as you would any other inside refrigerator part (please see the
Care and Cleaning Section).
To suit your need, "flip" the flip shelf as shown below. The shelf will stay in
position. The slider shelf portion slides in and out, like your other refrigerator
shelves. Remember to leave enough space above the shelf to "flip" the flip
shelf.
90°
Spillsafe™ glass shelves catch and hold accidental
spills. In some models, Spillsafe™ shelves slide out
for easy access to food, and fast cleaning. Shelves
slide out independently of the cantilever bracket.
Just pull front of shelf forward. Shelf can be extended
as far as stopper will allow, and is not removable from
the cantilever bracket.