Card Connectors - Keithley 2000-SCAN-20 Instruction Manual

Card connectors

Figure 2-2
the HI and LO input connections for all 20 channels, and J1035 provides the HI and LO outputs.
Terminal identification for connectors J1035 and J1036 is provided in
and Table 2-2, respectively
The J1035 connects to a plug that has four separate test leads. These test leads connect to the
rear HI and LO INPUT and SENSE jacks on the multimeter. Refer
multimeter" on page 2-16
NOTE It is not necessary to connect the OUT B leads for 2-pole mode operation.
The J1036 connects to a DB44 mass-terminated connector.
Figure 2-2
Card connectors
shows the input and output connectors for the card. Card connector J1036 provides
for more information.
Red
Card Connections and Installation
HI
To DMM
Sense
LO
Black
Output Input
Connector
Connector
J1035
2-5
Figure 2-3 and Table 2-1
to"Output connections to
HI
To DMM
Input
LO
Black
Red