Adding Shot Marks While Recording - Canon XF100 Instruction Manual

Adding Shot Marks while Recording

Adding Shot Marks while Recording
When recording, you can flag an important shot in a clip by adding a "shot mark" (n). There are two types of
shot marks, shot mark 1 (c) and shot mark 2 (d), and you can add either or both types to a single clip. When
86
the camcorder is in
screen of all the shot marks (0 121), allowing you to find a particular scene in a clip more quickly.
Operating modes:
To add a shot mark to a clip while recording, you must first set in advance an assignable button to [Shot Mark 1]
or [Shot Mark 2]. You can also press the SHOT1 button on the wireless controller to add the c mark.
1 Set an assignable button to [Shot Mark 1] or [Shot Mark 2] (0 97).
• To add both shot marks, set one assignable button to [Shot Mark 1] and another assignable button to [Shot
Mark 2].
2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.
• A message indicating the short mark will appear and the selected shot mark will be added to the current
frame of the clip.
• You can press the button again to add another shot mark. Up to 100 shot marks (c and d marks
combined) can be added to a single clip.
NOTES
• There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot
mark.
• When you are using interval recording or frame recording mode, you cannot add shot marks to a clip.
• When a clip contains either shot mark, n will appear next to the clip's thumbnail in the playback index screen.
mode, you can add or delete shot marks (0 122). You can also display an index