Using The Focal Length Guide - Canon XF100 Instruction Manual

Using the Focal Length Guide

Using the Focal Length Guide
The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical
value and has a range of 154 steps. You can set the guide to 0 at any point in the zoom range to help precisely
96
calibrate both camcorders.
Operating modes:
1 Set up two camcorders and align their picture angle.
2 Open the [Focal Length Guide] submenu.
[l Camera Setup]
3 Select [Set To 0] and then press SET.
• The focal length guide appears on the left side of the screen as
[z ±0]. To turn off the indicator, select [Off] instead.
• You can obtain more accurate results by performing this step at full
telephoto.
• If both camcorders are set so that the same value is displayed during zoom, the focal length for both
camcorders will be maintained.
NOTES
• Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while
recording.
[Zoom] [Focal Length Guide]
[l Camera Setup]
Zoom]
[
[Focal Length Guide]