Table of Contents
Advertisement
Remote sensor
SLOW
Rewind
T
W
Button
EFFECT
EFFECT
ON/OFF
PLA
Y
B
ACK
E
F
F
E
C
T
O
F
F
1
C
L
A
S
S
I
C
F
I
LM
2
M
O
N
O
T
O
N
E
3
S
E
P
I
A
4
S
T
R
O
B
E
5
V
I
D
E
O
E
C
H
O
Playback Special Effects
FEATURE:
PURPOSE:
To allow you to add creative effects to the video playback image.
OPERATION:
1) To start playback, press PLAY (4).
2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select
Menu appears.
3) Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after
2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT ON/OFF on the remote control. Pressing it again re-activates the
selected effect.
To change the selected effect, repeat from step 2 above.
NOTES:
● When some Playback Special Effects are used, the Multi-Analyser 4 and Multi-Analyser 9 Snapshot modes
(
pg. 42) are not available.
● The effects that can be used during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The
effects work the same in playback as they did in recording. Refer to page 39 for more information.
FEATURE:
PURPOSE:
To allow slow-speed search in either direction during
video playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
NOTES:
● You can also engage Slow-Motion Playback from Still
● During Slow-Motion Playback, due to digital image
● After SLOW (9 or 0) is pressed and held, the still image
SLOW
Forward
Button
● There may be a small margin between the slow-motion
● During Slow-Motion Playback, there will be distur-
PAUSE
● During Slow-Motion Playback, press PAUSE (6) to
PLAY
FEATURE:
PLAYBACK
PURPOSE:
EFFECT Select
To allow frame-by-frame search during video playback.
Menu
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
NOTE:
You can also engage Frame-By-Frame Playback from Still
Playback by pressing SLOW (9 or 0) repeatedly.
Slow-Motion Playback
SLOW (9 or 0) more than approx. 2 seconds. After
approx. 1 minute in Slow Rewind or approx. 2 minutes
in Slow Forward, normal playback resumes.
To stop Slow-Motion Playback, press PLAY (4).
Playback by pressing SLOW more than approx. 2 seconds.
processing, the picture may take on a mosaic effect.
may be displayed for a few seconds, followed by a blue
screen for a few seconds. This is not a malfunction.
playback start point you chose and the actual start
point for Slow-Motion Playback.
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunction.
pause playback.
Frame-By-Frame Playback
press SLOW (0) repeatedly for forward or SLOW (9)
repeatedly for reverse. Each time it is pressed, the frame
is played back.
59
EN
Advertisement
Table of Contents
