Table of Contents
Advertisement
MENU/BRIGHT Wheel
Display
<
>
NEXT
D P O F
100-DVC00021
VGA
1 9
0 0
2 0
0 0
2 1
0 3
2 2
0 0
2 3
0 0
2 4
0 0
DPOF
SE ECT
L
–
CANCEL
EXECUTE
TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS
1
2
3
4
DPOF Screen
5
Confirmation
6
Screen
To Reset The No. Of Prints . . .
.... select "RESET" in step 4 on pg. 34. The number of
NOTES:
● If you load a memory card already set as shown above
● To print images recorded on a tape, first dub them to a
Perform steps 1 through 3 on pg. 34.
Rotate the MENU/BRIGHT wheel to selsect "SELECT"
and press it. Selection is complete. The DPOF Screen
appears.
Rotate the MENU/BRIGHT wheel to move the green
frame to the image you wish to print and press it.
Select the number of prints by rotating the MENU/
BRIGHT wheel towards "+" to increase the number,
or towards "–" to decrease the number and press it.
Repeat steps 3 and 4 for the desired number of prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image
again and change the number.
Rotate the MENU/BRIGHT wheel upward to select
"NEXT" and press it. Selection is complete. The
Confirmation Screen appears.
Rotate the MENU/BRIGHT wheel to select
"EXECUTE" and press it. The normal playback screen
appears.
•To cancel selection, rotate the MENU/BRIGHT
wheel to select "CANCEL" and press it.
prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power,
as this may cause the memory to be corrupted.
in a printer compatible with DPOF, it will make prints of
the selected still images automatically.
memory card (
pg. 56).
35
EN
Advertisement
Table of Contents
