Advertisement
1
BAGGER SUPPORT ASSEMBLY
(See Fig. 1 and 2)
1. Remove 4 screws from rear cover and retain.
2. Loosen 2 upper side screws two full turns.
UPPER SIDE
SCREW
SCREW
3. Slide support assembly slots over upper side screws.
4. Reinstall 4 screws through support assembly into
threaded holes in rear cover and tighten securely.
5. Securely retighten upper side screws.
6. Bagger support assembly is complete.
SUPPORT
ASSEMBLY
SLOT
SCREWS
SUPPORT
ASSEMBLY
ASSEMBLY
REAR COVER
UPPER SIDE
SCREW
SCREW
Fig. 1
UPPER
SIDE
SCREWS
SUPPORT
ASSEMBLY
SLOT
SCREWS
Fig. 2
2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 3)
NOTE: For ease of assembly, you may wish to obtain the
as sis tance of another person for mounting cover assembly
to riding mower.
1. Lift and rotate cover to align cover bracket with support
assembly.
2. Slide cover assembly down onto the support assembly.
COVER
ASSEMBLY
5
SUPPORT
ASSEMBLY
Fig. 3
Advertisement
