Canon VIXIA HF R10 Instruction Manual page 23

To remove the battery pack
1 Slide the battery compartment
cover away from the lens and
open it.
2 Press the battery release latch
and pull out the battery pack.
3 Close the cover and slide it
toward the lens until you hear a
click.
IMPORTANT
• Turn off the camcorder before connecting or disconnecting the com-
pact power adapter. After pressing
important data is updated in the memory. Be sure to wait until the green
ON/OFF (CHG) indicator goes out.
• The first time you use a battery pack, fully charge it and then use the
camcorder until the battery pack is completely exhausted.
• Do not connect to the camcorder's DC IN terminal or to the compact
power adapter any electrical equipment that is not expressly recom-
mended for use with this camcorder.
• To prevent equipment breakdowns and excessive heating, do not con-
nect the supplied compact power adapter to voltage converters for
overseas travels or special power sources such as those on aircraft and
ships, DC-AC inverters, etc.
NOTES
• The battery pack will be charged only when the camcorder is off.
• We recommend charging the battery pack in temperatures between
10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of
0 °C to 40 °C (32 °F to 104 °F), charging will not start.
• If remaining battery time is an issue, you can power the camcorder
using the compact power adapter so the battery pack will not be con-
sumed.
• Charged battery packs continue to discharge naturally. Therefore,
charge them on the day of use, or the day before, to ensure a full
charge.
Battery release latch
POWER to turn off the camcorder,
23
Preparations