No disc
- Insert a disc into the DVD burner.
- This message can appear also if condensation has formed (
burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
using the [Complete Initialization] option (
Direct Print Related Messages
Data transfer error
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
- You attempted to print from a memory card that contains a large number of photos. Reduce
the number of photos.
File error
- You attempted to print a photo that was recorded with another camcorder, has a different
compression, or was edited on a computer.
Hardware error
- Cancel printing. Turn off the printer and turn it back on.
- Check the printer status.
- Ink tank errors have occurred. Replace the ink tank.
Incompatible paper size
- The paper settings of the camcorder conflict with the printer's settings.
Ink absorber full
- Select [Continue] to resume printing. Consult a Canon Service Center (refer to the list included
with the printer) to replace the ink absorber.
Ink error
- The ink level cannot be detected correctly or the ink cartridge is out of ink. Replace the ink
cartridge.
167). Wait until the DVD
111) and initialize the memory
38).
Additional Information
161