Canon VIXIA HF R10 Instruction Manual page 119

• You can play back the converted scenes from the [For DVD (SD-VIDEO)]
index screen on the memory card. Open the original movies index
screen on the memory card, press
(SD-VIDEO)].
Connecting to the Computer and Creating DVD Discs
1 Power the camcorder using the compact power adapter.
2 Open the [For DVD (SD-VIDEO)] index screen on the memory card.
• Open the original movies index screen on the memory card, press
INDEX SEL.
• If the device selection screen appears, select [Computer/Printer] and
press .
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection
• On the computer, ImageMixer 3 SE will launch automatically and the
startup screen (ImageMixer 3 Launcher) will appear.
4 Click [Disc writing] and continue the operation on the computer
following the software's indications.
See also 'ImageMixer 3 SE Software Guide'.
IMPORTANT
• While the camcorder is connected to a computer, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
computer.
Connecting to the DW-100 DVD Burner and Creating DVD Discs
Operating modes:
1 Power the camcorder using the compact power adapter.
then select [For DVD (SD-VIDEO)].
Connection Diagrams
. Refer to
4
INDEX SEL. and then select [For DVD
(
External Connections
109).
119