Canon VIXIA HF R10 Instruction Manual page 159

Some photos could not be deleted
- Protected photos (
Some scenes could not be added to the playlist
- Scenes that were not recorded with this camcorder cannot be added to the playlist.
- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in
FXP mode, the maximum number of scenes in the playlist may be less than 999. Delete some
scenes from the playlist (
/
Some scenes could not be converted
- Among the scenes selected for conversion to SD there are scenes recorded with another
device using 24p frame rate. When converting scenes to SD, leave out scenes recorded using
another device.
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
/
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.
This photo could not be deleted
- Protected photos (
/ This memory card contains scenes. Delete all scenes to use relay recording.
- Save the movies on the memory card (
( 38).
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer.
- The playlist can contain a maximum of 999 scenes.
This scene was recorded using another device and cannot be added to the playlist.
- Scenes that were not recorded with this camcorder cannot be added to the playlist.
/
This scene was recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
To use this function, switch out of
- You pressed a button that cannot be used in
to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (for Windows and printers) or 1,000 photos
(for Mac OS). Disconnect the USB cable, and restore the connection after a short while.
) cannot be deleted. Remove the protection (
80).
) cannot be deleted. Remove the protection (
mode
123) and initialize the memory card
mode. Press
Additional Information
96).
96).
to set the camcorder
159