Download Print this page

Neato Robotics D8 Quick Start Manual

Hide thumbs Also See for D8:

Download this manual

Quick start guide

Insert plug behind the charge

base. Shorten the cord as

needed by wrapping it behind

the charge base.

Download the MyNeato

application.

Select a clear area with good Wi-Fi

coverage. Make sure the charge base

is against the wall and plugged in.

12"

Check your mobile device setting

to make sure the Bluetooth is

switched on.

Place the robot against the

charge base. When docked

properly, the battery icon will

light up.

12"

Finish your set up process

with the MyNeato application.

Need help?

Do you have a question about the D8 and is the answer not in the manual?

Page 1 Quick start guide Insert plug behind the charge Select a clear area with good Wi-Fi Place the robot against the base. Shorten the cord as coverage. Make sure the charge base charge base. When docked needed by wrapping it behind is against the wall and plugged in.
Page 2 Helpful hints Set up your house Keep your charge base secure Before the robot starts to vacuum, pick up items that Your charge base comes with a pad designed to could become tangled, such as cables, socks, and keep it secure on a hardwood floor. Remove these shoelaces.

945-0372