Installation - ICP DAS USA GTM-204M Series User Manual

4.2 Installation

GTM-204M-4G should be installed by technical person who should be with the proper
authorization.
GTM-204M-4G should install on the location that general person will not be touch.

SIM card and 4G antenna installation
WARNING! HOT SURFACE DO NOT TOUCH
The product's enclosure may be with high temperature, do not touch before
cooling or else will be burned.
SAFETY INSTRUCTION NOTES
The unit installation to final system and the DC source (SELV, Limited Power
Source) that is intended to connect with power input pins (DC.+VS / DC.GND)
should be complied with requirements of EN 60950-1. Be sure before connect
to input pins.
GTM-204M-4G Series User's Manual v1.3
- 7/35 -