Setting The Clock; Continuous Bake Or 12 Hour Energy Saving; Minute Timer - Frigidaire GLES388CSB Control Manual

Setting the Clock

Clock
The clock may be set for 12 or 24 hours time of day operation. The clock has been preset at the factory for 12-hour operation.
When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash
and PF (power failure) will appear in the display.
To set the clock (example 1:30)
1. Press CLOCK pad. "CLO" will appear in the display.
2. Press 1 3 0 to set the time of day to 1:30. Press START pad. "CLO" will disappear and the clock will start.
Changing between 12 or 24 hour time of day display
1. Press and hold CLOCK pad for 9 seconds, two beeps will sound.
2. The display will show "12:00" to indicate the 12-hour time of day operation is active.
3. Press CLEAN pad to switch between 12 and 24 hour time of day display. The display will show either "12" or "24".
4. Press START to accept the change or press CLEAR OFF pad to reject the change.
5. Reset the correct time as described in "To set the clock" above. Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.

Continuous Bake or 12 Hour Energy Saving

The oven control has a factory preset built-in 12-Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set the control for continuous bake or 12 Hour Energy Saving
1. Press and hold TIMER ON/OFF pad for 7 seconds, ":12" or ": - -" will appear in the display and the control will beep once.
2. Press CLEAN pad to toggle between the 12 Hour Energy Saving (":12") display and continuous bake features (": - -").
3. Press START pad to accept the change (display will return to time of day) or press CLEAR OFF pad to reject the change.

Minute timer

The minute timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop
cooking. The minute timer can be used during any of the other oven functions. The minute timer can be set for any amount of
time from 1 minute to 11 hours 59 minutes in both the 12 or 24 hour clock modes.
To set the minute timer: (example 5 minutes)
1. Press TIMER ON/OFF pad, a beep will sound,"0:00" will appear in the display and "TIMER" will flash in the display.
2. Press the number pads to set the desired time in the display (example 5). Press START pad, the time will begin to count down
and "TIMER" will appear in the display. Note: If START is not pressed the timer will return to the time of day.
3. When the set time has run out, "End" will show in the display and 3 beeps every 60 seconds will sound until TIMER ON/
OFF is pressed.
To cancel the minute timer before the set time has run out:
Press TIMER ON/OFF. The display will return to the time of day.
2