Temperature Display - Fahrenheit Or Celsius; Consumer Defined Control Features; Oven Lockout Feature - Frigidaire GLES388CSB Control Manual

Consumer Defined Control Features

Oven Lockout Feature

The Oven Lockout feature prevents the oven from being accidentally turned on. It does not disable the clock, minute timer, surface
elements (or) burners, or the interior oven light.
To activate the Oven Lockout feature:
1. Press and hold LOCK pad for 3 seconds.
2. After 3 seconds the lock icon light will appear in te display, a beep will sound and "DOOR LOCKED" will flash in the display.
Once the oven door is locked the "door locked" indicator will stop flashing and remain on along with the lock icon light.
To reactivate Normal Oven Operation
1. Press and hold LOCK for 3 seconds. A beep will sound. The "DOOR LOCKED" will continue to flash until the oven door has
completely unlocked and the lock icon light will disappear.
2. The oven control can now be programmed for all operations.

Temperature display - Fahrenheit or Celsius

The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
To change from Fahrenheit to Celsius or to Celsius to Fahrenheit:
1. Identify which display your control is set for now. To tell if your range is set for Fahrenheit or Celsius press BROIL pad and
hold for 7 seconds. A beep will then sound. If "F" appears, the display is set to show temperatures in Fahrenheit. If "C"
appears, the display is set to show temperatures in Celsius.
2. Press CLEAN pad to switch between the Fahrenheit to Celsius display modes. The display will show either "F" or "C".
3. Press START pad to accept the change or press CLEAR OFF to reject the change.
For a Silent Control Operation:
The Silent Control Operation feature allows the control to be operated without sounds or beeps whenever necessary. If desired
the control can be programmed for silent operation and later returned to operating with all normal sounds and beeps.
To change control from normal sound operation to silent control operation:
1. Identify which sound operation your timer is set for now. To tell if your range is set for normal or silent operation press and
hold STOP TIME pad for 7 seconds. "DELAY" will appear and flash in the display. If ":SP" appears, the control will
operate in the normal operation mode and beeps. If ":--" appears, the control is in the silent operation mode.
2. Press CLEAN pad to switch between the normal sound operation and the silent operation mode. The display will show
either ":SP" or ":--".
3. Press START pad to accept the change or press CLEAR OFF pad to reject the change.
:
3