Synco Mic-M2S User Manual

User Manual
Microphone Mic-M2S
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Remove the battery for long time storage.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.

Operations

1. The Use of Wind Muff

Please install the wind muff to the microphone for wind noise suppression.

2. The Use of Microphone

1) Attach the shock mount to your
device via the cold shoe or 1/4" screw
hole on the bottom of the shock mount.
2) Mount the microphone onto the shock
mount, and connect the microphone with
your device via the 3.5mm TRS camera cable
or the 3.5mm TRRS phone cable.
3) Turn on the microphone and run the audio/video recording application in
your device.

3. Indicator Instruction

Indicator Green
Microphone Status Power On

4. Battery Replacement

SYNCO Mic-M2S uses a replaceable AAA battery. Please install or replace the
battery as shown below.

Specifications

1. Polar Pattern: Cardioid
Blue
Low-cut Function On