Symbols - RIDGID R3101 Operator's Manual

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this
product.
SYMBOL
SYMBOL
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
V
A
Hz
min
n o
.../min
1.800.561.8187
SIGNAL MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
DANGER:
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
WARNING:
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
CAUTION:
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
CAUTION:
property damage.
NAME
Safety Alert
Read Operator's Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
Volts
Amperes
Hertz
Minutes
Alternating Current
No Load Speed
Class II Tool
Per Minute
www.
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Failure to keep your hands away from the blade will result in serious
personal injury.
Do not expose to rain or use in damp locations.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
5 - English
.com
information@itm.com