LG ipsolute LW6354 Series Owner's Manual page 24

- OFF: Turn off the digital effect.
> D-ZOOM: Select [On] to set the digital zoom level.
- ZOOM: You can enlarge the screen.
- PAN: You can move the screen. (left or right)
- TILT: You can move the screen. (up or down)
> Color: You can switch the displayed picture to gray scale or
color.
- On: To display the picture with color. If you set [On], the
[Color Level] option is activated. Adjust the [Color Level]
value using by jog controller or enter the desired value.
- Off: To display the picture with grayscale.
> Sharpness: The degree to which the boundary of the two
portions is clearly distinguished. Adjust the value using
by jog controller enter the desired value. If you set the
sharpness value to higher, the image outline becomes sharp.
If you set to lower value, the image outline becomes dim.
> Stabilizer: The image stabilizer function minimizes the
appearance of shaky images caused by low-frequency
vibration. This function is useful for outdoor surveillance.
Select the [Stabilizer] option and set to [On] or [Off ].
> Camera Version: Displays the software version on the
monitor.
• Factory Reset: Clear certain settings and information and return
to factory default settings.
• Reboot: Reboot the camera system.
24
Stream
Resolution
> HD: Displays the maximum image size of the camera.
> SD: Select the output image size of the camera.
Profile
> Enable: Click to activate the stream function.
> Video codec: Select the video mode (Codec) from the drop-
down list. The viewer can choose among MJPEG, H.264 and
H.264_HIGH.
> Maximum frame rate: Set the frame rate of the image.
> GOP size: It means "Group of Pictures". The higher the GOP,
the better is the video quality of the camera. Edit the value
of GOP from 1 to 30. This setting is valid for H.264 video
format only.
> Quality: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
> Stream quality: If the [Quality] option set to VBR, this option
is displayed. Select the stream quality from the drop down
Operation and settings