Hearth and Home Technologies PHFR-MCE-36 Installation Instructions Manual page 10

17. Insert the center finishing trim piece between the two
plenums. See Figure 5.22 and 5.23.
CENTER FINISHING TRIM PIECE CENTER FINISHING TRIM PIECE
Figure 5.22 Insert Center Finishing Trim Piece
Figure 5.23 Insert Center Finishing Trim Piece
10 Hearth & Home Technologies • PHFR-MCE-36, PHFR-MCE-48, PHFR-MCE-60, PHFR-MCE-72 Instructions • 2560-972 • 6/20
18. Bend the edge of the left and right side trim pieces
over for a reference on where to cut the drywall. See
Figure 5.24.
19. Install collar to bottom side of each plenum using hur-
ricane screws provided in the kit. See Figure 5.25.
Note: The PHFR-MCE-60 and PHFR-MCE-72 require
two collars per plenum.
BEND SIDE TRIM PIECE BEND SIDE TRIM PIECE
Figure 5.24 Bend Side Trim Piece
COLLAR COLLAR
Figure 5.25 Install Collar(s) to Bottom of Plenum