Progress PK0800 User Manual page 22

22 progress
Important! Remove the furniture door
damper if possible, to provide free space for
the free movement of the appliance door.
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
min 1 mm
2. Install the appliance in the niche.
a) Push the appliance in the direction of
b) Push the appliance in the direction of
3. Adjust the appliance in the niche. Align
the lower hinge with the kitchen furniture.
the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
the arrows (2) against the cupboard
on the opposite side of the hinge.
2
1