Canon Optura S1 Instruction Manual page 127

Memory Card Operation
Problem
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Image cannot be erased.
" " flashes red.
Printing
Problem
The printer is not operating
even though camcorder and
printer are correctly
connected.
Editing
Problem
Dubbing via the camcorder's
DV terminal does not work.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Insert a memory card.
Memory card is full. Replace the memory card or erase
images.
Memory card is not formatted. Format the memory card.
The folder and file numbers have reached their maximum
value. Set [FILE NOS.] to [RESET] and insert a new memory
card.
Set the power switch to PLAY and the TAPE/CARD switch to
.
Insert a memory card.
Image is protected. Cancel the protection.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Format the memory card if flashing
persists.
1. Set the power switch to PLAY and the TAPE/CARD switch
to .
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
Set [AV DV] to [OFF].
Wrong signal format. Dubbing may work via the AV terminal.
Refer also to the instruction manual of the connected device.
Solution
Solution
Solution
20
E
20
92
93
67
38
20
91
93
–
65
–
127