Table of Contents
Advertisement
When [LCD MIRROR] is set to [ON], only tape or card operation and self-timer displays
appear on the LCD screen (all displays appear on the viewfinder screen).
TV SCREEN: Shows the camcorder displays on a connected TV screen.
You can also use the TV SCREEN button on the wireless controller.
DISPLAYS: Shows the displays on the screen during playback.
When set to [OFF]:
- Displays except for the data code disappear (the displays for magnification of a
playback image and digital effects, the audio level indicator and the FUNC. menu still
appear).
- Tape operation displays appear for approximately 2 seconds.
- Displays also disappear from the connected TV, except for some warning messages.
6SEC. DATE: The camcorder displays the date and time for 6 seconds when you begin
playback, or to indicate that date or time zone has changed.
The 6-second auto date appears even if [DISPLAYS] is set to [OFF].
DEMO MODE: The demonstration mode displays the camcorder's main features. It starts
automatically when you leave the camcorder turned on without loading a recording media
for more than 5 minutes using the power adapter.
To cancel the demo mode once it has begun, press any button, turn off the camcorder
or load a recording media.
SYSTEM
Menu Items
WL. REMOTE
ON, OFF
BEEP
HIGH VOLUME, LOW VOLUME, OFF
POWER SAVE
ON, OFF
FILE NOS.
RESET, CONTINUOUS
WL. REMOTE: Sets the camcorder to be operated with the wireless controller.
BEEP: A beep sounds upon operations such as turning on the camcorder, during self-
timer countdown or warnings such as condensation.
POWER SAVE: When powered by a battery pack, the camcorder shuts off after 5 minutes
when the camcorder is left without any operation to save power. Approximately 30
seconds before the camcorder shuts off, "
of the screen.
FILE NOS.: Select the file numbering method upon inserting a new memory card.
Images are automatically assigned file numbers from 0101 to 9900, and stored in
folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: The file number starts at 101-0101. If the memory card already contains
images files, the consecutive file number will be assigned.
[CONTINUOUS]: The consecutive file number of the last recorded image will be
assigned. If a higher file number already exists on the memory card, the consecutive
number will be assigned. This is useful for organizing images on a computer.
Setting Options
AUTO POWER OFF" appears in the center
E
-
-
-
-
67
Hide quick links:
Advertisement
Table of Contents
