How To Manage: Error Codes; Service Data - AEG BSK99733PT User Manual

TROUBLESHOOTING

13.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
F111 - Food sensor is not correctly inserted in‐
to the socket.
F908 - the oven system cannot connect with
the control panel.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the oven functions will continue to work
as usually.
Code and description
F131 - the temperature of the steamer sensor
is too high.
F144 - the sensor in the Water drawer cannot
measure the water level.
F508 - the Water drawer does not work prop‐
erly.

13.3 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
50/64
Remedy
Fully plug Food sensor into the socket.
Turn the oven off and on.
Remedy
Turn the oven off and wait until it cools down.
Turn the oven on again.
Empty the Water drawer and refill it.
Turn the oven off and on.
.........................................
.........................................
.........................................