Setting The Date And Time - Canon Optura 100 Instruction Manual

Setting the Date and Time

E
The date and/or time display forms part of the data code. You can choose to
display or hide it during playback (
Set the date and time display when you first start using your camcorder. Install the
backup battery before you begin (
• Before you start setting the date and time, select your home time zone from the
menu.
Setting the time zone/daylight saving time
+
TAPE CAMERA
( 37)
1. Open the menu and select SYSTEM.
2. Select T.ZONE/DST.
• The time zone display appears on the screen.
• Your camcorder's time zone is factory-preset to New York. If you are at
another time zone, select your time zone first and daylight saving time
(DST) setting if necessary.
3. Move up or down the list of time zones with the selector dial.
Select the option that represents your time zone.
• If you are now in daylight saving time, select the time zone with the
daylight saving time mark C next to the area.
4. Close the menu.
48
80).
130).
,
+
CARD CAMERA
C T
E L E
H / S
P U S