Canon Optura 100 Instruction Manual page 22

About SP and
E
• The image quality of recordings done in
than that of those done in SP or LP modes.
• A cassette recorded in
camcorder not equipped with that mode.
• The recording mode might not appear in the display correctly if you switch to
SP or
• When the recording mode is changed to
the image for appropriate recording in that mode.
• You might not be able to do DV dubbing correctly with the camcorder set to
SP or
16:9 (Wide screen TV recording)
Produces images in the 16:9 format for
playback on wide screen TVs.
+
TAPE CAMERA
( 37)
To switch 16:9 to ON, open the menu and select CAM.SET UP. Then
select 16:9, set it to ON and close the menu.
Notes:
• "16:9" is shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the multi-image screen when setting the 16:9 mode on.
• If you play back a recording made for 16:9 on a normal TV screen, the image
will appear to be vertically "squashed" (compressed).
• If you connect the camcorder to a TV with an S1 terminal or the Video ID-1
system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
22
LP modes
SP or
LP while the camcorder is connected to another digital video device.
LP mode.
CAM.SET UP
SP or LP modes will be lower
LP mode cannot be played back on a
SP or LP, the camcorder modifies
16:9••••••••OFF