TYAN S8036 Manual
  1. Manuals
  2. Brands
  3. TYAN Manuals
  4. Motherboard
  5. S8036
  6. Manual
TYAN S8036 Manual

TYAN S8036 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

S8036

Version 1.0f
Copyright
Copyright © 2019 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
®
TYAN
is a trademark of MiTAC International Corporation.
®
®
AMD
is a trademark of AMD
Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
®
®
Microsoft
, Windows
are trademarks of Microsoft Corporation.
®
Winbond
is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
®
warranty, relating to sale and/or use of TYAN
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
1
http://www.tyan.com

Advertisement

Table of Contents
loading

Related Manuals for TYAN S8036

Summary of Contents for TYAN S8036

  • Page 1: S8036

    Corporation and has been reviewed for accuracy and reliability prior to printing. MiTAC assumes no liability whatsoever, and disclaims any express or implied ® warranty, relating to sale and/or use of TYAN products including liability or warranties relating to fitness for a particular purpose or merchantability. MiTAC retains the right to make changes to product descriptions and/or specifications at any time, without notice.

  • Page 2: Table Of Contents

    Contents S8036 ......................1 Before you begin… ..................3 Chapter 1: Instruction ................4 1.1 Congratulations ................. 4 1.2 Hardware Specifications ..............4 1.3 Software Specifications ..............8 Chapter 2: Board Installation ..............9 2.1 Board Image ..................10 2.2 Block Diagram ................. 12 2.3 Motherboard Mechanical Drawing ...........

  • Page 3: Before You Begin

    The retail motherboard package should contain the following: S8036 Motherboard x 1 SATA Single Cable x 2 Rear IO shielding x 3 1 x S8036 Quick Installation Guide M.2 Screw kit x2 IMPORTANT NOTE: Sales samples may not come with any of the accessories listed above.

  • Page 4: Chapter 1: Instruction

    32 and 64-bit computing, high-bandwidth memory design, and lightning-fast PCI-E bus implementation. The S8036 not only empowers you in today’s demanding IT environment but also offers a smooth path for future application upgradeability. All of these rich feature sets provide the S8036 with the power and flexibility to meet demanding requirements for today’s IT environments.
  • Page 5 Voltage supply Fan fail LED indicator, Over temperature warning indicator, Fan & PSU fail LED indicator Others Watchdog timer support Server 24-bit high quality video compression, Supports AST2500 iKVM Feature Management storage over IP and remote platform-flash, USB 2.0 http://www.tyan.com...
  • Page 6 90%, non-condensing at 35° C RoHS RoHS 6/6 Compliant Operating OS supported list Please refer to our AVL support lists. System Motherboard (1) S8036 Motherboard Manual (1) Quick Installation Guide Package Contains I/O Shield (1) I/O Shield Cable (SATA) (2) SATA signal cables...
  • Page 7 (1) PCI-E Gen4 x 24 slot, (1) PCI-E Gen4 x 24 slot (w/x16 link; can be x24 link if OCP mezz. conn.A is PCI-E not used. Please contact with Tyan technical support for details.) M7106-L24-3F, PCI-E x16 slot 2U riser card...

  • Page 8: Software Specifications

    Package Contains I/O Shield (1) I/O Shield Cable (SATA) (2) SATA signal cables 1.3 Software Specifications For the latest AST2500 User’s Guide and OS (operation system) support, please visit the Tyan’s Web site at http://www.tyan.com for the latest information http://www.tyan.com...

  • Page 9: Chapter 2: Board Installation

    Caution! To avoid damaging the motherboard and associated components, do not use torque force greater than 5~7kgf/cm (4.35~6.09 lb/in) on each mounting screw for motherboard installation. Do not apply power to the board if it has been damaged. http://www.tyan.com...

  • Page 10: Board Image

    2.1 Board Image S8036GM2NE http://www.tyan.com...
  • Page 11 S8036GM2NE-LE This picture is representative of the latest board revision available at the time of publishing. The board you receive may not look exactly like the above picture. http://www.tyan.com...

  • Page 12: Block Diagram

    2.2 Block Diagram S8036 Block Diagram http://www.tyan.com...

  • Page 13: Motherboard Mechanical Drawing

    2.3 Motherboard Mechanical Drawing http://www.tyan.com...

  • Page 14: Board Parts, Jumpers And Connectors

    The board you receive may not look exactly like the above diagram. The DIMM slot numbers shown above can be used as a reference when reviewing the DIMM population guidelines shown later in the manual. For the latest board revision, please visit our web site at http://www.tyan.com. http://www.tyan.com...
  • Page 15 29. CPU_FAN (CPU_FAN) 30. PCIE/SATA 74P SLIMSAS Connector 7. BCM5720 RJ45 LAN Connector (LAN3) (SLIMSAS2) 31. PCIE/SATA 74P SLIMSAS Connector 8. TYAN Module Header (DBG_HD1) (SLIMSAS1) 9. Rear ID LED Button (ID LED_BTN1) 32. Front Fan_3 (SYS_FAN_3) 10. HDT Header (HDT1) 33.
  • Page 16 Onboard BMC IPMI ALERT LED (IPMI__LED2) v Rear ID LED (ID_LED2) x HDD_ACT_LED (HDD_LED3) NOTE: 1. SD card socket is an OEM-reserved feature which is not enabled on current product offering. 2. HDR_1-5: NVME Hotplug I2C connector for NVME HDD backplane. http://www.tyan.com...
  • Page 17 HDR_1/HDR_2/HDR_3/HDR_4/HDR_5: CPU SMBUS Header Signal Signal HP_SCK VDD_33_DUAL HP_ALERT HP_SDA DBG_HD1: TYAN Module Header Signal Signal VDD_33_RUN FRAME_N LAD0 LAD1 RESET# LAD2 LAD3 DBG_SERIRQ DBG_PRES_N 3VSB TPM_PP_EN COM2: Serial Port Header Signal Signal SOUT CPU FAN/ SYS FAN1~5: 4-pin CPU Fan Connector...
  • Page 18 SATA RX DN SATA RX DP TYPEA_USB1: Vertical (Type_A) USB3.0 Connector Signal Signal USB2.0_DATA_N USB2.0_DATA_P USB3.0_RX_N USB3.0_RX_P USB3.0_TX_N USB3.0_TX_P USB3_FPIO1: Front USB3.0 Header Signal Signal USB3_VCC_FP P0_RXN P0_RXP P0_TXN P0_TXP P0_N P0_P OC_N P1_P P1_N P1_TX_P P1_TX_N P1_RX_P P1_RX_N USB3_VCC_FP http://www.tyan.com...
  • Page 19 TACH8 TACH4 TACH9 TACH5 TACH10 PWM2 PWM1 TACH11 SMB_DATA TACH12 SMB_CLK PWM3 FPIO2: Front Panel Connector Signal Signal PWRLED+ V3P3_AUX IDLED+ PWRLED- IDLED- HDDLED+ SYS_FAULT1- HDDLED- SYS_FAULT2- PWR_SW# LAN0LED+ LAN0LED- RESET_SW# SMBDATA SMBCLK IDLED_SW# INTRUSION# SYS_Air_Inlet LAN1LED+ NMI_SW# LAN1LED- http://www.tyan.com...
  • Page 20 Signal VDD_33_RUN VDD_33_RUN J1_SATA_NVME# J2_SATA_NVME# 2-4: J2 (SlimSAS2) NVME SMBUS 4-6: J2 (SlimSAS2) SATA SGPIO J190/J191: BMC COM PORT2 (RX/TX) Jumper Signal Signal BMC_COM_TXD/ TXD_OUT/RXD_OUT BMC_COM_RXD BMC_TXD5 BMC_RXD5 1-2 : BMC COM PORT2 (DEFAULT) 2-3 : BMC CONSOLE PORT5 http://www.tyan.com...
  • Page 21 3. Move the jumper cap to close Pin_2 and Pin_3 for several seconds to Clear CMOS. Clear CMOS 4. Put jumper cap back to Pin_1 and Pin_2 (Default setting). 5. Reconnect power connectors to the motherboard and power on system. http://www.tyan.com...
  • Page 22 NVME0_SCK NVME0_WAKE_L NVME0_SDA NVME0_PEREFCLK_DP NVME0_PERST_L NVME0_PEREFCLK_DN NVME0_PRSNT_L NVME0_RX_N2 NVME0_TX_P2 NVME0_RX_P2 NVME0_TX_N2 NVME0_RX_N3 NVME0_TX_P3 NVME0_RX_P3 NVME0_TX_N3 NVME1_RX_N0 NVME1_TX_P0 NVME1_RX_P0 NVME1_TX_N0 NVME1_RX_N1 NVME1_TX_P1 NVME1_RX_P1 NVME1_TX_N1 NVME1_BP_TYPE NVME1_SCK NVME1_WAKE_L NVME1_SDA NVME1_PEREFCLK_DP NVME1_PERST_L NVME1_PEREFCLK_DN NVME1_PRSNT_L NVME1_RX_N2 NVME1_TX_P2 NVME1_RX_P2 NVME1_TX_N2 NVME1_RX_N3 NVME1_TX_N3 NVME1_RX_P3 NVME1_TX_P3 http://www.tyan.com...
  • Page 23 VDD_33_RUN VDD_33_RUN VDD_33_DUAL PESLOT1_PERST_L PESLOT1_WAKE_L PESLOT1_PEREFCLK_DP PESLOT1_PEREFCLK_DN CPU0_PCIE_G1_PESLOT2_TX_N15_C CPU0_PCIE_G1_PESLOT2_TX_P15_C CPU0_PCIE_G1_PESLOT2_RX_P15 CPU0_PCIE_G1_PESLOT2_RX_N15 CPU0_PCIE_G1_PESLOT2_TX_N14_C CPU0_PCIE_G1_PESLOT2_TX_P14_C CPU0_PCIE_G1_PESLOT2_RX_P14 CPU0_PCIE_G1_PESLOT2_RX_N14 CPU0_PCIE_G1_PESLOT2_TX_N13_C CPU0_PCIE_G1_PESLOT2_TX_P13_C CPU0_PCIE_G1_PESLOT2_RX_P13 CPU0_PCIE_G1_PESLOT2_RX_N13 CPU0_PCIE_G1_PESLOT2_TX_N12_C CPU0_PCIE_G1_PESLOT2_TX_P12_C CPU0_PCIE_G1_PESLOT2_RX_P12 CPU0_PCIE_G1_PESLOT2_RX_N12 PESLOT1_PEREFCLK_B_DP PESLOT1_PEREFCLK_B_DN CPU0_PCIE_G1_PESLOT2_TX_N11_C CPU0_PCIE_G1_PESLOT2_TX_P11_C CPU0_PCIE_G1_PESLOT2_RX_P11 CPU0_PCIE_G1_PESLOT2_RX_N11 CPU0_PCIE_G1_PESLOT2_TX_N10_C CPU0_PCIE_G1_PESLOT2_TX_P10_C CPU0_PCIE_G1_PESLOT2_RX_P10 CPU0_PCIE_G1_PESLOT2_RX_N10 CPU0_PCIE_G1_PESLOT2_TX_N9_C CPU0_PCIE_G1_PESLOT2_TX_P9_C CPU0_PCIE_G1_PESLOT2_RX_P9 CPU0_PCIE_G1_PESLOT2_RX_N9 CPU0_PCIE_G1_PESLOT2_TX_N8_C CPU0_PCIE_G1_PESLOT2_TX_P8_C http://www.tyan.com...
  • Page 24 CPU0_PCIE_G1_PESLOT2_TX_N4_C CPU0_PCIE_G1_PESLOT2_TX_P4_C CPU0_PCIE_G1_PESLOT2_RX_P4 CPU0_PCIE_G1_PESLOT2_RX_N4 CPU0_PCIE_G1_PESLOT2_TX_N3_C CPU0_PCIE_G1_PESLOT2_TX_P3_C CPU0_PCIE_G1_PESLOT2_RX_P3 CPU0_PCIE_G1_PESLOT2_RX_N3 CPU0_PCIE_G1_PESLOT2_TX_N2_C CPU0_PCIE_G1_PESLOT2_TX_P2_C CPU0_PCIE_G1_PESLOT2_RX_P2 CPU0_PCIE_G1_PESLOT2_RX_N2 CPU0_PCIE_G1_PESLOT2_TX_N1_C CPU0_PCIE_G1_PESLOT2_TX_P1_C CPU0_PCIE_G1_PESLOT2_RX_P1 CPU0_PCIE_G1_PESLOT2_RX_N1 CPU0_PCIE_G1_PESLOT2_TX_N0_C CPU0_PCIE_G1_PESLOT2_TX_P0_C CPU0_PCIE_G1_PESLOT2_RX_P0 CPU0_PCIE_G1_PESLOT2_RX_N0 PESLOT1_X16_DETECT_L PE_SLOT_PRSNT_L VDD_33_RUN VDD_33_RUN PESLOT1_PEREFCLK_C_DN PESLOT1_PEREFCLK_C_DP VDD_33_DUAL CPU0_PCIE_G0_PESLOT2_RX_P23 CPU0_PCIE_G0_PESLOT2_TX_P23_C CPU0_PCIE_G0_PESLOT2_RX_N23 CPU0_PCIE_G0_PESLOT2_TX_N23_C CPU0_PCIE_G0_PESLOT2_RX_P22 CPU0_PCIE_G0_PESLOT2_TX_P22_C CPU0_PCIE_G0_PESLOT2_RX_N22 CPU0_PCIE_G0_PESLOT2_TX_N22_C CPU0_PCIE_G0_PESLOT2_RX_P21 CPU0_PCIE_G0_PESLOT2_TX_P21_C CPU0_PCIE_G0_PESLOT2_RX_N21 CPU0_PCIE_G0_PESLOT2_TX_N21_C http://www.tyan.com...
  • Page 25 P0_SFP_SMBUS_CLK B113 PE1_SMB2_SDA A114 B114 VDD_12_RUN A115 VDD_12_RUN B115 VDD_12_RUN PESLOT2 Connector VDD_12_RUN_PE VDD_12_RUN_PE VDD_12_RUN_PE VDD_12_RUN_PE VDD_12_RUN_PE SLOT2_HP_DATA PE2_SMB_SCK SLOT2_HP_CLK PE2_SMB_SDA VDD_33_RUN VDD_33_RUN VDD_33_RUN VDD_33_DUAL PESLOT2_PERST_L PESLOT2_WAKE_L PESLOT2_PEREFCLK_DP PESLOT2_PEREFCLK_DN CPU0_PCIE_G3_PESLOT1_TX_P0_C CPU0_PCIE_G3_PESLOT1_TX_N0_C CPU0_PCIE_G3_PESLOT1_RX_N0 CPU0_PCIE_G3_PESLOT1_RX_P0 CPU0_PCIE_G3_PESLOT1_TX_P1_C CPU0_PCIE_G3_PESLOT1_TX_N1_C CPU0_PCIE_G3_PESLOT1_RX_N1 CPU0_PCIE_G3_PESLOT1_RX_P1 CPU0_PCIE_G3_PESLOT1_TX_P2_C CPU0_PCIE_G3_PESLOT1_TX_N2_C http://www.tyan.com...
  • Page 26 CPU0_PCIE_G3_PESLOT1_TX_N4_C CPU0_PCIE_G3_PESLOT1_RX_N4 CPU0_PCIE_G3_PESLOT1_RX_P4 CPU0_PCIE_G3_PESLOT1_TX_P5_C CPU0_PCIE_G3_PESLOT1_TX_N5_C CPU0_PCIE_G3_PESLOT1_RX_N5 CPU0_PCIE_G3_PESLOT1_RX_P5 CPU0_PCIE_G3_PESLOT1_TX_P6_C CPU0_PCIE_G3_PESLOT1_TX_N6_C CPU0_PCIE_G3_PESLOT1_RX_N6 CPU0_PCIE_G3_PESLOT1_RX_P6 CPU0_PCIE_G3_PESLOT1_TX_P7_C CPU0_PCIE_G3_PESLOT1_TX_N7_C CPU0_PCIE_G3_PESLOT1_RX_N7 CPU0_PCIE_G3_PESLOT1_RX_P7 CPU0_PCIE_G3_PESLOT1_TX_P8_C CPU0_PCIE_G3_PESLOT1_TX_N8_C CPU0_PCIE_G3_PESLOT1_RX_N8 CPU0_PCIE_G3_PESLOT1_RX_P8 CPU0_PCIE_G3_PESLOT1_TX_P9_C CPU0_PCIE_G3_PESLOT1_TX_N9_C CPU0_PCIE_G3_PESLOT1_RX_N9 CPU0_PCIE_G3_PESLOT1_RX_P9 CPU0_PCIE_G3_PESLOT1_TX_P10_C CPU0_PCIE_G3_PESLOT1_TX_N10_C CPU0_PCIE_G3_PESLOT1_RX_N10 CPU0_PCIE_G3_PESLOT1_RX_P10 CPU0_PCIE_G3_PESLOT1_TX_P11_C CPU0_PCIE_G3_PESLOT1_TX_N11_C CPU0_PCIE_G3_PESLOT1_RX_N11 CPU0_PCIE_G3_PESLOT1_RX_P11 CPU0_PCIE_G3_PESLOT1_TX_P12_C CPU0_PCIE_G3_PESLOT1_TX_N12_C CPU0_PCIE_G3_PESLOT1_RX_N12 CPU0_PCIE_G3_PESLOT1_RX_P12 CPU0_PCIE_G3_PESLOT1_TX_P13_C CPU0_PCIE_G3_PESLOT1_TX_N13_C CPU0_PCIE_G3_PESLOT1_RX_N13 CPU0_PCIE_G3_PESLOT1_RX_P13 http://www.tyan.com...
  • Page 27 B104 CPU0_PCIE_G2_PESLOT2_TX_N21_C A105 B105 A106 CPU0_PCIE_G2_PESLOT2_RX_N22 B106 CPU0_PCIE_G2_PESLOT2_TX_P22_C A107 CPU0_PCIE_G2_PESLOT2_RX_P22 B107 CPU0_PCIE_G2_PESLOT2_TX_N22_C A108 B108 A109 CPU0_PCIE_G2_PESLOT2_RX_N23 B109 CPU0_PCIE_G2_PESLOT2_TX_P23_C A110 CPU0_PCIE_G2_PESLOT2_RX_P23 B110 CPU0_PCIE_G2_PESLOT2_TX_N23_C A111 B111 A112 P0_SFP_SMBUS_DATA B112 PE2_SMB2_SCK A113 P0_SFP_SMBUS_CLK B113 PE2_SMB2_SDA A114 B114 VDD_12_RUN A115 VDD_12_RUN B115 VDD_12_RUN http://www.tyan.com...

  • Page 28: Led Definitions

    The LED lights up when Green BMC was reset OK; Signal VDD_33_RUN NGFF1_LED_L LED_M1 NGFF1_LED State Description The LED shuts off when no NGFF1 SSD insert The LED blinks when Blinking Green SSD working; http://www.tyan.com...
  • Page 29 ALERT LED HW Sensor status is normal HW Sensor status is abnormal. Signal VDD_33_DUAL N18825566 PSMI_LED1 PSU_ALERT_N LED State Description PSU status is abnormal PSU status is normal Signal VDD_33_DUAL REAR_ID_LED_N ID_LED2 ID_LED State Description Not ID BLUE ID_LED http://www.tyan.com...

  • Page 30: Installing The Processor And Heatsink

    2.6 Installing the Processor and Heatsink The types of processors supported by the S8036 are listed in the 1.2 Hardware Specifications section on page 4. Check our website at http://www.tyan.com ® the latest list of validated AMD processors for this specific motherboard.
  • Page 31 -) make sure to push the carrier frame with package towards the end of the rail frame until it clicks in place. -) do not drop the carrier frame or touch the package pad to avoid component damage. Using your thumbs and forefinger, remove the PnP cap by lifting it up vertically. http://www.tyan.com...
  • Page 32 Carefully close the rail frame with the installed package. Then push both edges of the rail frame firmly until it locks in place. Close the force frame. Then use a T20 Torx screwdriver to tighten the screws to secure the force frame in a sequential order (1->2->3). http://www.tyan.com...
  • Page 33 ® The following diagram illustrates how to install the heatsink on the AMD Socket: 1. Align and install the CPU heatsink onto the top of the CPU socket. 2. Use a T20 Torx screwdriver to tighten the heatsink screws. http://www.tyan.com...
  • Page 34 3. Connect the heatsink power cable to the mainboard connector. http://www.tyan.com...

  • Page 35: Thermal Interface Material

    CPU lid (applying too much will actually reduce the cooling). NOTE: Always check with the manufacturer of the heat sink & processor to ensure that the thermal interface material is compatible with the processor and meets the manufacturer’s warranty requirements. http://www.tyan.com...

  • Page 36: Tips On Installing Motherboard In Chassis

    Be especially careful to look for extra stand-offs. If there are any stand-offs present that are not aligned with a mounting hole on the motherboard, it will likely short components on the back of the motherboard when installed. This will cause malfunction and/or damage to your motherboard. http://www.tyan.com...
  • Page 37 Some chassis include plastic studs instead of metal. Although the plastic studs are usable, MiTAC recommends using metal studs with screws that will fasten the motherboard more securely in place. Below is a chart detailing what the most common motherboard studs look like and how they should be installed. http://www.tyan.com...

  • Page 38: Installing The Memory

    2.9 Installing the Memory Before installing memory, ensure that the memory you have is compatible with the motherboard and processor. Check the TYAN Web site at http://www.tyan.com details of the type of memory recommended for your motherboard.  Support (16)DDR4 288-pin DIMM slots(L)R DDR4 3200 Mhz w/ECC 1.2V, ...
  • Page 39 - Use the same DIMM size - Use the same # of ranks per DIMM 4. Dual-rank DIMMs are recommended over single-rank DIMMs. 5. Un-buffered DIMM can offer slightly better performance than registerd DIMM if populating only a single DIMM per channel. http://www.tyan.com...
  • Page 40 Rome in Rome in DIMM DIMM 0 DIMM 1 legacy optimized Type platform platform 2666 3200 2133 2933 2R or 2DR 2400 3200 2R or 2DR 2133 2933 2R or 2DR 2R or 2DR 2133 2933 2666 3200 2133 2933 http://www.tyan.com...
  • Page 41 Memory Installation Procedure Follow these instructions to install memory modules into the S8036. Unlock a DIMM socket by Press the retaining clip outwardly in the following illustration. Align the memory module with the socket，such that the DIMM NOTCH match the KEY SLOT on the socket.

  • Page 42: Attaching Drive Cables

    The following illustrates how to make a SATA Cable connection. If you are in need of SATA/SAS cables or power adapters please contact your local sales representative. 1. SATA drive cable connection 2. SATA drive power connection 3. SATA cable motherboard connector 4. SATA drive power adapter http://www.tyan.com...

  • Page 43: Installing Add-In Cards

    Doing so allows air to circulate within the chassis more easily, thus improving cooling for all installed devices. NOTE: You must always unplug the power connector from the motherboard before performing system hardware changes to avoid damaging the board or expansion device. http://www.tyan.com...

  • Page 44: Connecting External Devices

    1Gbps LAN Link/Activity LED Scheme Left LED Right LED Description (Link/Activity) (Speed) No Link Link Green 10 Mbps Active Blinking Green Link Green Solid Green 100 Mbps Active Blinking Green Solid Green Link Green Solid Amber 1Gbps Active Blinking Green Solid Amber http://www.tyan.com...

  • Page 45: Installing The Power Supply

    2.13 Installing the Power Supply There are Three (3) power connectors on your S8036 motherboard. The S8036 supports EPS 12V power supply. PWR1: ATX 24-Pin Power Connector Signal Signal +3.3V_1 +3.3V_4 +3.3V_2 -12V COM_1 COM_4 +5V_1 PS-ON# COM_2 COM_5 +5V_2...

  • Page 46: Chapter 3: Bios Setup

    Exit current menu <F1> General help <F2> Previous values <F3> Load the Optimal default configuration values of the menu <F4> Save and exit <K> Scroll help area upwards <M> Scroll help area downwards <PgUp> / <PgDn> Move cursor to next/previous page http://www.tyan.com...
  • Page 47 BIOS menus are continually changing due to continual BIOS updates over the product lifespan of the motherboard. The BIOS menus provided are current as of the date when this manual was written. Please visit TYAN’s website at http://www.tyan.com for information on BIOS updates available for this specific motherboard.

  • Page 48: Main Menu

    It displays BIOS related information. Product Name It displays Product information. BIOS Version It displays BIOS version information Build Date and Time It displays the time when built Memory Information It displays the total memory size. Memory Frequency It displays Memory frequency http://www.tyan.com...
  • Page 49 System Date Set the Date. Use Tab to switch between Date elements. Default Ranges: Year: 2005-2099 Months: 1-12 Days: dependent on month System Time Adjust the system clock. HH (24 hours format): MM (Minutes): SS (Seconds) Access Level Adminstrator http://www.tyan.com...

  • Page 50: Advanced Menu

    This section facilitates configuring advanced BIOS options for your system. CPU Configuration CPU Configuration parameters Onboard Device Configuration Onboard Device and Function Configuration. PCIE Slot Configuraion Onboard PCIE Slot Configuration Trusted Computing Trusted Computing settings. ACPI Settings System ACPI Parameters Hardware Health Configuration Hardware Health Configuration http://www.tyan.com...
  • Page 51 PCI, PCI-X and PCI Express Settings USB Configuration USB Configuration Parameters CSM Configuration CSM Configuration, Enable/Disable Option ROM execution setting, etc NVMe Configuration NVMe Device Options settings SATA Configuration SATA Device Information Network Stack Configuration Network Stack Settings iSCSI Configuration Configure the iSCSI parameters http://www.tyan.com...
  • Page 52 3.3.1 CPU Configuration SVM Mode Enable/disable CPU virtulization. Disabled / Enabled SMEE Control secure memory encryption enable Disabled / Enabled CPU 0 Information View Information related to CPU 0 http://www.tyan.com...
  • Page 53 3.3.1.1 CPU0 Information http://www.tyan.com...
  • Page 54 Onboard / Offboard Onboard LAN (B5720) Enable/Disable Onboard LAN Device Disabled / Enabled LAN1 Port1 OPROM Enable/Disable Load Option ROM For Onboard LAN. Disabled / Enabled LAN1 Port2 OPROM Enable/Disable Load Option ROM For Onboard LAN. Disabled / Enabled http://www.tyan.com...
  • Page 55 3.3.3 PCIE Slot Configuration NVMe SSD Hot Plug Support Enable/Disable NVMe SSD Hot Plug Disabled / Enabled Combo Link OCUL1&OCUL3 Combo Link OCUL1&OCUL3 Bifurcation OCUL1:SATA/ OCUL3:x8 / OCUL1:SATA/OCUL3:x4x4 / OCUL1:x8/ OCUL3:x8 / OCUL1:x8/OCUL3:x4x4 / OCUL1:x4x4/OCUL3:x8 / OCUL1:x4x4/OCUL3:x4x4 / x16: spanning OCUL1& OCUL3 http://www.tyan.com...
  • Page 56 / x8 NVMe OPROM Policy Select the NVMe SSD OPROM Policy Embeded OPROM / External OPROM / Auto OCP Slot Link Speed OnBoard PCIE Slot Link Speed Configuration. Auto / Gen1(2.5 GT/s) / Gen2 (5 GT/s) / Gen3 (8 GT/s) http://www.tyan.com...
  • Page 57 Onboard PCIE Slot Link Speed Configuration Auto / Gen1 (2.5 GT/s) / Gen2 (5 GT/s) / Gen3 (8 GT/s) Riser-R Middle Slot Link Speed Onboard PCIE Slot Link Speed Configuration Auto / Gen1 (2.5 GT/s) / Gen2 (5 GT/s) / Gen3 (8 GT/s) http://www.tyan.com...
  • Page 58 3.3.4 Trusted Computing Security Device Support Enable or disable BIOS support for security device. O.S. will not show Security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. Enabled / Disabled http://www.tyan.com...
  • Page 59 3.3.5 ACPI Settings Enable ACPI Auto Configuration Enables or Disables BIOS ACPI Auto Configuration. Disabled / Enabled Lock Legacy Resources Enables or Disables Lock of Legacy Resources Disabled / Enabled http://www.tyan.com...
  • Page 60 When Auto Fan Control was set to [Manual] PWM Minimal Duty Cycle Item will appear. PWM Minimal Duty Cycle PWM Minimal Duty Cycle BMC Alert Beep Enable/Disable BMC Alert Beep. On / Off PMBus support PMBus Support Disabled / Enabled http://www.tyan.com...
  • Page 61 3.3.6.1 Sensor Data Register Monitoring When you enter the Sensor Data Register Monitoring submenu, you will see the following dialog window pop out. Please wait 8~10 seconds. NOTE 1: SDR can not be modified. Read only. http://www.tyan.com...
  • Page 62 http://www.tyan.com...
  • Page 63 http://www.tyan.com...
  • Page 64 Wake system from S5 Enable or disable system wake on alarm event. Select Fixed time, system will wake on the hr::min::sec specified. Select dynamic time, system will wake on the current time+ increase minute(s) Disabled / Fixed Time / Dynamic Time http://www.tyan.com...
  • Page 65 Console Redirection Settings The settings specify how the host computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. NOTE: Console Redirection Settings menu only appear when Console Redirection was set to [Enabled]. http://www.tyan.com...
  • Page 66 1’s in the data bits is odd. Mark: parity bit is always 1. Space: parity bit is always 0. Mark and Space parity do not allow for error detection. None / Even / Odd / Mark / Space http://www.tyan.com...
  • Page 67 With this mode enabled only text will be sent. This is to capture Terminal data. Disabled / Enabled Resolution 100x31 Enable or disable extended terminal resolution. Disabled / Enabled Putty KeyPad Select FunctionKey and KeyPad on Putty. VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400 http://www.tyan.com...
  • Page 68 1’s in the data bits is odd. Mark: parity bit is always 1. Space: parity bit is always 0. Mark and Space parity do not allow for error detection. None / Even / Odd / Mark / Space http://www.tyan.com...
  • Page 69 With this mode enabled only text will be sent. This is to capture Terminal data. Disabled / Enabled Resolution 100x31 Enable or disable extended terminal resolution. Disabled / Enabled Putty KeyPad Select FunctionKey and KeyPad on Putty. VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400 http://www.tyan.com...
  • Page 70 Bootloader is selected, then Legacy Console Redirection is disabled before booting to legacy OS, when Always Enable is selected, then Legacy Console Redirection is enabled for Legacy OS. Default setting for this option is set to Always Enable. Always Enable / BootLoader http://www.tyan.com...
  • Page 71 VT-UTF8 / VT100 / VT100+ / ANSI Bits per Second Select serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds. 9600 / 19200 / 57600 / 115200 http://www.tyan.com...
  • Page 72 ‘stop’ signal can be sent to stop the data flow. Once the buffers are empty, a ‘start’ signal can be sent to restart the flow. Hardware flow control uses two wires to send start/stop signal. None / Hardware RTS/CTS Data Bits / Parity / Stop Bits Read only. http://www.tyan.com...
  • Page 73 View and Set Basis properties of the SIO Logical device. Like IO Base, IRQ Range, DMA Channel and Device Mode. [*Active*] Serial Port 2 View and Set Basis properties of the SIO Logical device. Like IO Base, IRQ Range, DMA Channel and Device Mode. http://www.tyan.com...
  • Page 74 / IO=3F8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=3E8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=2E8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA http://www.tyan.com...
  • Page 75 / IO=3F8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=3E8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA / IO=2E8h, IRQ=3, 4, 5, 7, 9, 10, 11, 12;DMA http://www.tyan.com...
  • Page 76 Address Space(Only if System supports 64 bit PCI Decoding). Enabled / Disabled SR-IOV Support If system has SR-IOV capable PCIe devices, this option Enable or Disable Single root IO virtualization Support Enabled / Disabled PCI Express Settings Change PCI Express Devices Settings http://www.tyan.com...
  • Page 77 Maximum Read Request Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value. Auto / 128 Bytes / 256 Bytes / 512 Bytes / 1024 Bytes / 2048 Bytes / 4096 Bytes http://www.tyan.com...
  • Page 78 USB Mass Storage Driver Support Enable/Disable USB Mass Storage Driver Support. Disabled / Enabled Port 60/64 Emulation Enable I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. Disabled / Enabled http://www.tyan.com...
  • Page 79 Maximum time the device will take before it properly reports itself to the Host Controller. AUTO uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. Auto / Manual 3.3.12 CSM Configuration CSM support Enable/Disable CSM Support Enabled / Disabled http://www.tyan.com...
  • Page 80 Video Controls the execution of UEFI and legacy PXE OpROM Do not launch / UEFI / legacy Other PCI devices Determines OpRom execution policy for devices other than network, storage, or video Do not launch / UEFI / legacy http://www.tyan.com...
  • Page 81 3.3.13 NVMe Configuration http://www.tyan.com...
  • Page 82 3.3.14 SATA Configuration http://www.tyan.com...
  • Page 83 3.3.15 Network Stack Configuration Network Stack Enable/Disable UEFI Network Stack Disable / Enable http://www.tyan.com...
  • Page 84 Step 2. Select Advanced  Network Stack Configuration  Network Stack  [Enabled] Step 3. Save changes and reboot. iSCSI Initiator Name The worldwide unique name of iSCSI Initiator. Only IQM format is accepted. Range is from 4 to 223 http://www.tyan.com...

  • Page 85: Chipset Menu

    3.4 Chipset Menu North Bridge North Bridge Parameters http://www.tyan.com...
  • Page 86 3.4.1 North Bridge Configuration Memory Configuration Memory Configuration Memory Information Total Memory： xxxxx MB Socket 0 Configuration View Information related to Socket 0 http://www.tyan.com...
  • Page 87 3.4.1.1 Socket 0 Information http://www.tyan.com...

  • Page 88: Amd Cbs Menu

    3.5 AMD CBS Menu http://www.tyan.com...
  • Page 89 Global C-state Control Controls IO based C-state generation and DF C-states. Disabled / Enabled / Auto Local APIC Mode No help string xAPIC / x2APIC / Auto MCA error thresh enable Enable MCA error thresholding False / True / Auto http://www.tyan.com...
  • Page 90 3.5.1.1 Performance Submenu http://www.tyan.com...
  • Page 91 Custom – customize this Pstate. applicable only if Pcd0cDisable = FALSE WARNING – DAMAGE CAUSED BY USE OF YOUR AMD PROCESSOR OUTSIDE OF SPECIFICATION OR IN EXCESS OF FACTORY SETTINGS ARE NOT COVERED UNDER YOUR AMD PRODUCT WARRANTY AND MAY NOT BE COVERD BY YOUR SYSTEM Custom / Auto http://www.tyan.com...
  • Page 92 Sets the number of CCDs to be used. Once this option has been used to remove any CCDs, a POWER CYCLE is required in order for future selections to take effect. Auto / TWO (1 + 1) / FOUR (2 + 2) /SIX (3 + 3) http://www.tyan.com...
  • Page 93 3.5.1.2 Prefetcher Submenu L1 Stream HW Prefetcher Option to Enable | Disable L1 Stream HW Prefetcher Disable / Enable / Auto L2 Stream HW Prefetcher Option to Enable | Disable L1 Stream HW Prefetcher Disable / Enable / Auto http://www.tyan.com...
  • Page 94 3.5.2 DF Common Options Submenu http://www.tyan.com...
  • Page 95 Attempt to remap DRAM out of the space just below the 1TB boundary. The ability to remap depends on DRAM configuration, NPS, and interleaving selection, and may not always be possible. Do not remap / Attempt to remap / Auto http://www.tyan.com...
  • Page 96 3.5.3 UMC Common Options Submenu http://www.tyan.com...
  • Page 97 3.5.3.1 DDR4 Common Options Submenu http://www.tyan.com...
  • Page 98 3.5.3.1.1 DRAM Time Configuration Submenu Overclock Memory Overclock Settings Auto / Enabled http://www.tyan.com...
  • Page 99 Disable / Enable / Auto ACS Enable Supported functions of Access Control Services Enable / Disabled / Auto PCIe ARI Support Enables Alternative Routing-IO Interpretation Disable / Enable / Auto Enable AER Cap Enables Advanced Error Reporting Capability Disable / Enable / Auto http://www.tyan.com...
  • Page 100 1 = use power efficiency optimized CCLK DPM settings Auto / Enabled Package Power Limit Control Auto = Use the fused PPT Manual = User can set customized PPT *** will be used as the ASIC power limit*** Manual / Auto http://www.tyan.com...
  • Page 101 DF Cstates Enable = Enable DF C-states Disable = Disable DF C-states Disabled / Enabled / Auto BoostFmaxEn Auto = Use the default Fmax Manual = User can set the boost Fmax Manual / Auto 3.5.4 FCH Common Options Submenu http://www.tyan.com...
  • Page 102 3.5.4.1 AC Power LOSS Options Submenu Restore Ac Power Loss Select Ac Loss Control Method Power Off / Power On / Last State http://www.tyan.com...
  • Page 103 3.5.4.2 FCH RAS Options Submenu Reset after sync flood Enable AB to forward downstream sync-flood message to system controller. Disabled / Enabled / Auto http://www.tyan.com...

  • Page 104: Server Management

    OS Watchdog Timer If enabled, starts a BIOS timer which can only be shut off by management Software after the OS loads. Helps determine that the OS successfully loaded or follows the OS Boot Watchdog Timer policy. Disabled / Enabled http://www.tyan.com...
  • Page 105 Not available if OS Boot Watchdog Timer is disabled. Do Nothing / Reset / Power Down / Power Cycle BMC Logo Enable or Disable BMC logo Disabled / Enabled System Event Log Press<Enter> to change the SEL event log configuration. BMC network configuration Configure BMC network parameters http://www.tyan.com...
  • Page 106 Do Nothing / Erase Immediately / Delete Oldest Record Log EFI Status Codes Disable the logging of EFI Status Codes or log only error code or only progress code or both. Both / Disabled / Error Code / Progress Code http://www.tyan.com...
  • Page 107 3.6.2 BMC Network Configuration Submenu http://www.tyan.com...
  • Page 108 Management Port 2 Enable/Disable BMC Share NIC Disabled / Enabled Configure IPV6 support Management Port 1 IPV6 Support Enable or Disable LAN1 IPV6 Support Disabled / Enabled Management Port 2 IPV6 Support Enable or Disable LAN2 IPV6 Support Disabled / Enabled http://www.tyan.com...

  • Page 109: Security

    3.7 Security Administrator Password Set Administrator Password. User Password Set User Password. Security Frozen Mode Enable or disable HDD security freeze lock. Disable to support secure erase function. Disabled / Enabled Secure Boot Customizable Secure Boot settings http://www.tyan.com...
  • Page 110 When Secure Boot Mode was set to [Custom],the following items will be available to set up. Restore Factory Keys Force System to User Mode. Install factory default Secure Boot key databases Reset To Setup Mode Delete all Secure Boot Key databases from NVRAM http://www.tyan.com...
  • Page 111 Force System to User Mode. Install Factory Default Secure Boot key databases. Reset To Setup Mode Delete all Secure Boot Key database from NVRAM Export Secure Boot variable Copy NVRAM content of Secure Boot variables to files in a root folder on a file system device http://www.tyan.com...
  • Page 112 Enroll Factory Defaults or load certificates from a file: 1. Public Key Certificate in: a) EFI_SIGNATURE_LIST b) EFI_CERT_X509 (DER encoded) c) EFI_CERT_RSA2048 (bin) d) EFI_CERT_SHA256,384,512 2. Authenticated UEFI Variable 3. EFI PE/COFF Image(SHA256) Key Source: Default, External, Mixed, Test http://www.tyan.com...
  • Page 113 Enroll Factory Defaults or load certificates from a file: 1. Public Key Certificate in: a) EFI_SIGNATURE_LIST b) EFI_CERT_X509 (DER encoded) c) EFI_CERT_RSA2048 (bin) d) EFI_CERT_SHA256,384,512 2. Authenticated UEFI Variable 3. EFI PE/COFF Image(SHA256) Key Source: Default, External, Mixed, Test http://www.tyan.com...

  • Page 114: Boot

    Enable or disable Quiet Boot option. Disabled / Enabled Endless Boot Enabled or Disabled Endless boot Disabled / Enabled Wait for “ESC” if Error Enabled or Disabled Wait ESC key Function. When chassis intrusion, CMOS Clear or BMC not Response. Disabled / Enabled http://www.tyan.com...
  • Page 115 Boot Option Priorities Boot Option #1 Sets the system boot order. Device Name / Disabled Delete Boot Option Remove an EFI boot option from the boot order http://www.tyan.com...
  • Page 116 3.8.1 Delete Boot Option Configuration Delete Boot Option Remove an EFI boot option from the boot order. Device Name / Select one to Delete http://www.tyan.com...

  • Page 117: Save & Exit

    Reset system setup without saving any changes. Save Changes Save changes done so far to any of the setup options. Discard Changes Discard changes done so far to any of the setup options. Restore Defaults Restore/Load Default values for all the setup options. http://www.tyan.com...
  • Page 118 Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override Device Name http://www.tyan.com...

  • Page 119: Chapter 4: Diagnostics

    BIOS flash failure, you must contact your dealer for a replacement BIOS. There are no exceptions. TYAN does not have a policy for replacing BIOS chips directly with end users. In no event will TYAN be held responsible for damages done by the end user.

  • Page 120: Amibios Post Code (Aptio)

    South Bridge initialization before microcode loading 0x05 OEM initialization before microcode loading 0x06 Microcode loading 0x07 AP initialization after microcode loading 0x08 North Bridge initialization after microcode loading 0x09 South Bridge initialization after microcode loading 0x0A OEM initialization after microcode loading 0x0B Cache initialization http://www.tyan.com...
  • Page 121 Memory initialization. Configuring memory 0x2F Memory initialization (other) 0x30 Reserved for ASL (see ASL Status Codes section below) 0x31 Memory Installed 0x32 CPU post-memory initialization is started. 0x33 CPU post-memory initialization. Cache initialization CPU post-memory initialization. Application Processor(s) (AP) 0x34 initialization http://www.tyan.com...
  • Page 122 S3 Resume Progress Codes 0xE0 S3 Resume is started (S3 Resume PPI is called by the DXE IPL). 0xE1 S3 Boot Script execution 0xE2 Video repost 0xE3 OS S3 wake vector call 0xE4 – 0xE7 Reserved for future AMI progress codes http://www.tyan.com...
  • Page 123 DXEIPL was not found. DXE Core Firmware Volume was not found. Recovery failed S3 Resume failed Reset PPI is not available. DXE Phase Status Code Description 0x60 DXE Core is started. 0x61 NVRAM initialization 0x62 Installation of the South Bridge Runtime Services http://www.tyan.com...
  • Page 124 PCI Bus Hot Plug Controller initialization 0x94 PCI Bus Enumeration 0x95 PCI BUS Request Resources 0x96 PCI Bus Assign Resources 0x97 Console output devices connect 0x98 Console Input devices connect 0x99 Super IO initialization 0x9A USB initialization is started. http://www.tyan.com...
  • Page 125 0xC0 – 0xCF OEM BDS initialization codes DXE Error Codes 0xD0 CPU initialization error 0xD1 North Bridge initialization error 0xD2 South Bridge initialization error 0xD3 Some of the Architectural Protocols are not available 0xD4 PCI resource allocation error. Out of Resources http://www.tyan.com...
  • Page 126 System is waking up from the S3 sleep state. 0x40 System is waking up from the S4 sleep state. System has transitioned into ACPI mode. Interrupt controller is in 0xAC APIC mode. System has transitioned into ACPI mode. Interrupt controller is in 0xAA APIC mode. http://www.tyan.com...

  • Page 127: Appendix I: Fan And Temp Sensors

    (rpm) Temp Sensor: SYS_Air_Outlet(RT3) ,and MB_Air_Inlet(RT2) etc. They detect the system temperature around. NOTE: The system temperature is measured in a scale defined by AMD, not in Fahrenheit or Celsius. http://www.tyan.com...
  • Page 128 BIOS Temp Sensor Name Explanation: http://www.tyan.com...
  • Page 129 The highest temperature of CPU0 D3 UMC1 channel F slot P0_D2_UMC1_CH_G The highest temperature of CPU0 D2 UMC1 channel G slot P0_D2_UMC0_CH_H The highest temperature of CPU0 D2 UMC0 channel H slot BIOS FAN Sensor Name Explanation CPU0_FAN Fan speed of CPU0_FAN http://www.tyan.com...
  • Page 130 Fan speed of SYS_FAN_5 SYS_FAN_6 Fan speed of SYS_FAN_6 SYS_FAN_7 Fan speed of SYS_FAN_7 SYS_FAN_8 Fan speed of SYS_FAN_8 SYS_FAN_9 Fan speed of SYS_FAN_9 SYS_FAN_10 Fan speed of SYS_FAN_10 SYS_FAN_11 Fan speed of SYS_FAN_11 SYS_FAN_12 Fan speed of SYS_FAN_12 http://www.tyan.com...
  • Page 131 NOTE http://www.tyan.com...

  • Page 132: Glossary

    (reading to or writing from a disk drive a single time is much faster than doing so repeatedly) there is the possibility of losing your data should the system crash. Information in a buffer is temporarily stored, not permanently saved. http://www.tyan.com...
  • Page 133 (like soundcards or keyboards) to access the main memory without involving the CPU. This frees up CPU resources for other tasks. As with IRQs, it is vital that you do not double up devices on a single line. Plug-n-Play devices will take care of this for you. http://www.tyan.com...
  • Page 134 ROM chip which can, unlike normal ROM, be updated. This allows you to keep ® ’s up with changes in the BIOS programs without having to buy a new chip. TYAN BIOS updates can be found at http://www.tyan.com ESCD (Extended System Configuration Data): a format for storing information about Plug-n-Play devices in the system BIOS.
  • Page 135 PXE (Preboot Execution Environment): one of four components that together make up the Wired for Management 2.0 baseline specification. PXE was designed to define a standard set of preboot protocol services within a client with the goal of allowing networked-based booting to boot using industry standard protocols. http://www.tyan.com...
  • Page 136 NVIDIA s (graphics communications processing units) and NVIDIA MCPs (media and processors). application Depending on the , NVIDIA SLI can deliver as much as two times the performance of a single GPU configuration. http://www.tyan.com...
  • Page 137 CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. http://www.tyan.com...

  • Page 138: Technical Support

    "TYAN's tech support is some of the most impressive we've seen, with great response time and exceptional organization in general" - Anandtech.com Help Resources: 1. See the beep codes section of this manual.
  • Page 139 (RMA) number. The RMA number Should be prominently displayed on the outside of the shipping carton and the package should be mailed prepaid. ® TYAN will pay to have the board shipped back to you. Notice for the USA Compliance Information Statement (Declaration of...

Table of Contents