Regular Maintenance; Maintenance Schedule - Briggs & Stratton Snapper Pro S800X Series Operator's Manual

Maintenance

Regular Maintenance

Maintenance Schedule

The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of your
operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter.
Safety Items
Check Safety Interlock System
Check Rider Brakes
Check Mower Blade Stopping Time
Rider Maintenance
Check Rider / Mower for loose hardware
Clean Deck & Check / Replace Mower Blades**
Lubricate Rider & Mower **
Clean Battery & Cables
Check Tire Pressure
Check Hydraulic Oil Level
Change Hydraulic Oil Filter **
Check Gearbox Oil Level
Engine Maintenance
Check Engine Oil Level
Check / Clean Cooling Fins & Intake **
Service Air Filter *
Change Oil & Filter *
Check / Replace Spark Plugs *
Check / Replace Fuel Filter *
Check / Clean Spark Arrester***
* Refer to engine owner's manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** If equipped. Replace if damaged.
**** Change gearbox oil after first 100 hrs. and every 500 hrs. thereafter (See Gearbox Maintenance).
28
Before Every 5 Every 25
Each Use Hours Hours
•
•
Before Every 5 Every 25
Each Use Hours Hours
• •
•
Before Every 5 Every 25
Each Use Hours Hours
•
Every 100 Every 250
Hours Hours
•
Every 100 Every 250
Hours Hours
•
•
•
•
•
•
•
Every 100 Every 250
Hours Hours
•
Every 50 hours
www.SnapperPro.com
Spring &
Fall
•
•
•
Spring &
Fall
•
Spring &
Fall